Categories

Motor Drivers

Motor Drivers
Sort By:
Show:
Display: List Grid
  • A4983 Bipolar Stepper Motor Chip
    A4983. Simply inputting one pulse on the STEP input drives the motor one microstep. There are no phase sequence tables, high frequency control lines, or complex interfaces to program. The A4983 interface is an ideal fit for applications where a complex microprocessor is unavailable or is overburdene..
    KES 500.00
  • Big Easy Driver
    Overview   The Big Easy Driver, designed by Brian Schmalz, is a stepper motor driver board for bi-polar stepper motors up to 2A/phase. It is based on the Allegro A4983 stepper driver chip. It's the next version of the popular Easy Driver board.   Each BigEasyDriver can drive up..
    KES 2,000.00
  • Easy Driver
    Overview   The EasyDriver is a simple to use stepper motor driver, compatible with anything that can output a digital 0 to 5V pulse (or 0 to 3.3V pulse if you solder SJ2 closed on the EasyDriver). EasyDriver requires a 7V to 30V supply to power the motor and can power any voltage of stepp..
    KES 1,500.00
  • gShield v5 Synthetos
    We are now selling the new v5 version of the gShield, formerly grblShield. Other than the price, there is very little difference between the v4 and the v5. Both can be used on the Arduino Uno to run grbl, or on the Arduino Due to run the TinyG Due port. The v5 power jumper simply allows the gShield ..
    KES 10,000.00
  • L293D IC Motor Driver
    Description Looking to play around with motors (stepper or DC)? This is the perfect chip. With two full H-bridges you can control either two DC motors or one bi-polar stepper motor (4, 5, 6, or 8 wire). Simply plug it into a breadboard and use the included one page guide to get your motors spinni..
    KES 200.00
  • L298 Dual H-Bridge Motor Driver
    Double H driver module uses  L298N dual full-bridge driver, an integrated monolithic circuit in a 15- lead Multiwatt and PowerSO20 packages. It is a high voltage, high current dual full-bridge driver designed to accept standard TTL logic levels and drive inductive loads such as relays, sole..
    KES 500.00
  • L298N Full-Bridge Motor Driver
    Description:  The LN298 is a high voltage, high current, dual full-bridge motor driver designed to  accept standard TTL logic levels and drive inductive loads such as relays, solenoids, DC and stepping motors. Comes in a staggered, 15-lead Multiwatt package. Check below for a breakou..
    KES 400.00
  • MC33035P Brushless DC Motor Driver
    Manufacturer:     ON Semiconductor      Product Category:     Motor/Motion/Ignition Controllers & Drivers      RoHS:     No      Brand:     ON Semiconductor      Type: &n..
    KES 200.00
  • Monster Moto Shield
    This is essentially a ramped up version of our Ardumoto motor driver shield. For this monster shield we've replaced the L298 H-bridge with a pair of VNH2SP30 full-bridge motor drivers. We've also beefed up the support circuitry so this board is capable of driving a pair of high-current motors! The V..
    KES 2,000.00
  • Motor/Stepper/Servo Shield for Arduino v2
    Adafruit have upgraded the shield kit to make the bestest, easiest way to drive DC and Stepper motors. This shield will make quick work of your next robotics project! Has the ability to drive up to 4 DC motors or 2 stepper motors, but added many improvements: Instead of a L293D darlington driver,..
    KES 2,500.00
  • SN754410 Motor Driver IC
    The SN754410NE from Texas Instruments is a quadruple half-H driver that can be used for bidirectional control of two DC motors or to control a single bipolar stepper motor. You can use this item as a replacement part, to stack on an existing motor controller, or to make your own motor or other high-..
    KES 300.00
  • Stepper / Servo / DC Motor Shield
    A full-featured motor shield that will be able to power many simple to medium-complexity projects. 2 connections for 5V ‘hobby’ servos connected to the Arduino’s high-resolution dedicated timer – no jitter! 4 H-Bridges: L293D chipset provides 0.6A per bridge (1.2A peak) with thermal shutdown..
    KES 500.00
  • Stepper Motor Driver High Current DRV8825
    This product is a carrier board or breakout board for TI’s DRV8825 stepper motor driver; we therefore recommend careful reading of the DRV8825 datasheet (1MB pdf) before using this product. This stepper motor driver lets you control one bipolar stepper motor at up to 2.2 A output current per co..
    KES 2,300.00
  • TC4468 Power Mosfet Driver
    The TC446X family of four-output CMOS buffer/drivers are an expansion from Microchips earlier single- and dual-output drivers. Each driver has been equipped with a two-input logic gate for added flexibility. The TC446X drivers can source up to 250 mA into loads referenced to ground. Heavily loaded c..
    KES 500.00
  • TC4469 Power Mosfet Driver
    The TC446X family of four-output CMOS buffer/drivers are an expansion from Microchips earlier single- and dual-output drivers. Each driver has been equipped with a two-input logic gate for added flexibility. The TC446X drivers can source up to 250 mA into loads referenced to ground. Heavily loaded c..
    KES 500.00
  • ULN2803 Darlington Driver 8-Channel
    Description:  8 Darlington Arrays in 18-Pin DIP Package part # ULN2803A. Perfect for running relays and high-power devices up to 500mA and up to 50V! Resources: Nuts and Volts article on Driving High Current Loads Documents: ULN2803A Datasheet ..
    KES 50.00