Menu
Your Cart

Hardware Accesories

Hardware Accesories
Heat Sink 35mm x 35mm x 10mm
Out Of Stock
Model: HS353510
Aluminium Heat Sink35mm x 35mm x 10mm..
KES 120.00
Infrared Line Tracking 5 Channel Infrared Line Tracking 5 Channel
Out Of Stock
Model: Line Tracker 5 Channel
Overview5-ch ITR20001/T infrared detector, high sensitivity, anti-jamming, stable performanceHigh precision analog output, combined with PID control algorithm, allows the robot tracks lines more stableSpecificationsPower: 3.3V ~ 5VDimension: 78mm × 18mmDetector spacing: 16mmMounting holes size: 3mmD..
KES 1,000.00
Model: Kapton tape 30mm
Kapton tape is made from polyimide plastic.  It has a very high heat resistance and is used as an electrical insulation tape where there are high temperatures.Due to Kapton tape’s large range of temperature stability and electrical isolation ability, it is used during the manufacturing and fina..
KES 1,100.00
Model: Matek Micro BEC Step-down Module 5/12V
Pretty much every multirotor build requires some sort of voltage regulator to step down the flight battery voltage to a level which is compatible with flight electronics and FPV gear, often running at 5 or 12 volts. This micro BEC (battery eliminator circuit) does just that, it takes ..
KES 500.00
Metal DC Geared Motor w/Encoder - 12V 251RPM 18Kg.cm
Out Of Stock
Model: 12V Motor w/Enc 251rpm 18kg.cm
This is a Gear Motor w/Encoder, model No.GB37Y3530-12V-251R. It is a powerful 12V motor with a 43.8:1 metal gearbox and an integrated quadrature encoder that provides a resolution of 16 counts per revolution of the motor shaft, which corresponds to 700 counts per revolution of the gearbox’..
KES 3,200.00
Motor Coupler 6mm to 10mm
2-3 Days
Model: Motor Coupler 6mm to 10mm
This jaw type half-coupling can be used to connect a 6mm shaft to another shaft 10mm. It is held in place by two set screws, and fits together with another CL8-25 series jaw coupling of any shaft size with a hard elastomer spider in between.Jaw type couplings are ideal for high-torque applications a..
KES 800.00
Motor Coupler 6mm to 8mm
Out Of Stock
Model: CFC-20*30
This jaw type half-coupling can be used to connect a 6mm shaft to another shaft 8mm. It is held in place by two set screws, and fits together with another CL8-25 series jaw coupling of any shaft size with a hard elastomer spider in between. Jaw type couplings are ideal for high-torque application..
KES 800.00
Multifunction Power Hub for FPV Multifunction Power Hub for FPV
2-3 Days
Model: Multifunction Power Hub
This six-in-one power HUB is specially designed for FPV Quadcopter to simplify wiring. It comes with 6 functions : 1. Simplified power distribution wiring 2. 5V USB Port power supply 3. LED Flash light controller - three flash modes of LED lights can be chosen by switch 4. Lost Plane Finder -Mov..
KES 1,000.00
Model: pan & tilt kit
This pan-tilt kit is the perfect way to give your project full range motion with two micro servos. The pan-tilt can rotate roughly 180° from side-to-side and can tilt up&downwards around 150°.   Since the recommended motors (sg90) to use are plain, every-day analog servos, you can use an..
KES 200.00
Power Module For APM
Out Of Stock
Model: APM2.5 Power unit
Power Module is a simple way of providing your APM/Arduflyer with clean power from a LiPo battery as well as current consumption and battery voltage measurements, all through a 6P cable The on-board switching regulator outputs 5.3V and a maximum of 3A from up to a 7S LiPo battery Special for APM2...
KES 1,500.00
Model: Power switch RC
The POWER SWITCH is a tiny MCU controlled on/off switch for your radio controlled model. A simple push button operates the switch meaning to eliminate theproblems associated with intermittent contact of an ordinary mechanical switch.The sealed unit is plastic and can easily be mounted to the transpo..
KES 1,300.00
PPM Encoder for Pixhawk
Out Of Stock
Model: PPM Encoder
The PPM Encoder plugs into the PWM servo output ports of any R/C  receiver and encodes them into a PPM pulse suitable for many autopilots  (e.g. Pixhawk). Modifications to the R/C receiver are not necessary.    The whole project is based around the ATMEL  Atmel168 AVR proc..
KES 1,500.00
Showing 37 to 48 of 77 (7 Pages)
The product is currently Out-of-Stock. Please enter your details below and we will notify you as soon as the product is available.
Name
Email
Phone
Comments