Menu
Your Cart

Hardware Accesories

Hardware Accesories
STANDARD GRIPPER KIT A - CHANNEL MOUNT STANDARD GRIPPER KIT A - CHANNEL MOUNT
Out Of Stock
Model: Standard Gripper Kit
This is the Standard Gripper Kit A, a simple and durable robotics kit that is great for “getting a grip” on pretty much any robotics project! Designed for use with any standard size Hitec or Futaba servo, the gripper kit is easy to assemble and requires only a Phillips Head Screwdriver. This Standar..
KES 2,500.00
Model: coupler 5mm-10mm
Stepper Motor Flexible Coupling Connect this to that with a set-screw coupler. These couplers are made of machined aluminum and have a spiral cut that makes them slightly flexible so they can be fit to two shafts even if they are not perfectly co-linear and will help reduce binding effects. The w..
KES 300.00
Stepper Motor Flexible Coupling - 5mm to 5mm Stepper Motor Flexible Coupling - 5mm to 5mm
Out Of Stock
Model: stepper coupler 5mm to 5mm
Connect this to that with a set-screw coupler. These couplers are made of machined aluminum and have a spiral cut that makes them slightly flexible so they can be fit to two shafts even if they are not perfectly co-linear and will help reduce binding effects. The way they're cut, they're a little sp..
KES 200.00
Stepper Motor Flexible Coupling 5mm to 8mm
Out Of Stock
Model: Flexible Coupling 5mm to 8mm
Stepper Motor Flexible CouplingConnect this to that with a set-screw coupler. These couplers are made of machined aluminum and have a spiral cut that makes them slightly flexible so they can be fit to two shafts even if they are not perfectly co-linear and will help reduce binding effects. The way t..
KES 200.00
Stepper Motor Mount Bracket NEMA-17 Sized Stepper Motor Mount Bracket NEMA-17 Sized
Out Of Stock
Model: Stepper Barcket N17
This mount will fit any NEMA-17 motor (with 31mm hole spacing) with four screws. There's two 30mm long slots, 30mm apart so you can easily attach it. Made of steel with welded 90-degree support triangles, its got a solid construction..
KES 300.00
Model: KF2EDG-5.0 2P Male Female
This screw terminal can be removed with an extra plug.This makes it easy to switch between different terminals without having to unscrew the terminals.Specifications:Diameter pins: 1mmDistance between pins: 5.08mm Terminal size (plug attached) (l x w x h): 22 x 10.16 x 15.2mm..
KES 50.00
Model: KF2EDG-5.0 3P Male Female
This screw terminal can be removed with an extra plug.This makes it easy to switch between different terminals without having to unscrew the terminals.Specifications:Diameter pins: 1mmDistance between pins: 5.08mm Terminal size (plug attached) (l x w x h): 22 x 10.16 x 15.2mm..
KES 60.00
Model: KF2EDG-5.0 4P Male Female
This screw terminal can be removed with an extra plug.This makes it easy to switch between different terminals without having to unscrew the terminals.Specifications:Diameter pins: 1mmDistance between pins: 5.08mm Terminal size (plug attached) (l x w x h): 22 x 10.16 x 15.2mm..
KES 70.00
Model: UBEC 3A
Your power supply problems just got SOLVED! This little circuit board may look tiny but inside is a high efficiency DC/DC step-down converter which can output up to 3 Amp at 5V without the need of any heat-sink or forced cooling. UBEC stands for "universal battery eliminator circuit" and this UBEC i..
KES 500.00
Ublox Neo-M8N GPS with Compass
Out Of Stock
Model: Ublox Neo-M8N GPS
Ublox Neo-M8N GPS with Compass This new design incorporates the HMC5883L digital compass, using the Ublox latest 8series module providing a convenient method of mounting the compass away from sources of interference that may be present in the confines of the vehicle. It features active circuitry ..
KES 2,900.00
Wheel Encoder Kit
Out Of Stock
Model: Wheel Encoder Kit
This encoder is a wide voltage, high resolution, short response speed, Digital output speed measurement module. It can measurethe motor speed when it works with the black code disk.(This kit including 2 pieces code disk with D shape hole diamete..
KES 1,150.00
Wheel Motor Adapter 4mm
2-3 Days
Model: Wheel Adapter 4mm
This is a high quality copper wheel-motor adapter which is compatible with many gear motors. This adapter will allow you to connect the DC motor to standard RC wheels with a hex connector. We're selling these adapter in pairs.     Specifications Material:Copper Outside diameter: 1..
KES 200.00
Showing 61 to 72 of 77 (7 Pages)
The product is currently Out-of-Stock. Please enter your details below and we will notify you as soon as the product is available.
Name
Email
Phone
Comments