Top Brand
Brand: Arduino
Model: Arduino Compatible
The Arduino Ethernet Shield allows an Arduino board to connect to the internet. It is based on the WiznetW5100ethernet chip. The Wiznet W5100 provides a network (IP) stack capable of both TCP and UDP. It supports up to four simultaneous socket connections. Use the Ethernet library to ..
KES 1,000.00
Model: gshield v5
We are now selling the new v5 version of the gShield, formerly grblShield. Other than the price, there is very little difference between the v4 and the v5. Both can be used on the Arduino Uno to run grbl, or on the Arduino Due to run the TinyG Due port. The v5 power jumper simply allows the gShield ..
KES 10,000.00
Model: MicroSD Card module
Support Micro SD Card, Micro SDHC card (high-speed card)
The level conversion circuit board that can interface level is 5V or 3.3V
Communication interface is a standard SPI interface
Control Interface: A total of six pins (GND, VCC, MISO, MOSI, SCK, CS), GND to ground,
VCC is the p..
KES 200.00
Brand: Sparkfun
Model: VNH2SP30 Dual Motor Drive
This is essentially a ramped up version of our Ardumoto motor driver shield. For this monster shield we've replaced the L298 H-bridge with a pair of VNH2SP30 full-bridge motor drivers. We've also beefed up the support circuitry so this board is capable of driving a pair of high-current motors! The V..
KES 5,000.00
Brand: Adafruit Industries
Model: RGB Matrix Shield for Arduino
If you've got an Arduino-compatible board, with an ATmega328p chip this shield will make usage a snap! A little light soldering to attach the headers, connector and terminal block and you're ready to rock. Plug it onto your microcontroller board, and you'll be able to attach any RGB matrix wit..
KES 1,000.00
Brand: Adafruit Industries
Model: SmartMatrix SmartLED Shield (V4) for Teensy 3
So you have a Teensy and a RGB LED Matrix Panel and you want an easy way to add graphics to your matrix without having to toss aside your Teensy or do too much soldering. Enter the SmartMatrix SmartLED Shield (V4) for Teensy 3.2, 3.5, or 3.6 (not the Teensy LC)!The SmartLED Shield gives you an easy ..
KES 3,500.00
Model: Arduino Compatible
A full-featured motor shield that will be able to power many simple to medium-complexity projects.
2 connections for 5V ‘hobby’ servos connected to the Arduino’s high-resolution dedicated timer – no jitter!
4 H-Bridges: L293D chipset provides 0.6A per bridge (1.2A peak) with thermal shutdown..
KES 400.00
