
Model: 8 x 8 LED RGB Dot Matrix Display Driver Board
The driver circuit based on 3 MBI5168 constant current sink drivers and a M54564 darlington source driver, the Colorduino pairs the M54564 with a single DM163 constant current driver. In order to better drive the RGB matrix and reach their best performance, we use the professional LED driver chip DM..
KES 1,800.00
Model: T-1000S
The T1000S SD card LED controller makes controlling your LED displays easy. Compatible with wide range of addressable LEDs and DMX signal communication protocol.
Perfect addressable LED solution for people who don't want to programme Arduino or other controllers. No programming code required.
..
KES 2,900.00
Model: EL Panel/Wire Inverter 12V
Item: 12 volt electroluminescent inverter for EL panel strip wireCapacity: A5 size EL panel or 10 meter EL wireInput: DC 12 volt 3A or lower, red wire positive, black wire negativeOutput: 100VAC 1000HzDimensions: 40x32x27mm, approximately 1 3/4 x 1 1/4 x 1 inches..
KES 700.00
Model: LED Ring 24 x WS2812
24 ultra bright smart LED NeoPixels are arranged in a circle. The rings are 'chainable' - connect the output pin of one to the input pin of another. Use only one microcontroller pin to control as many as you can chain together! Each LED is addressable as the driver chip is inside the LED. Each one h..
KES 500.00
Model: NeoPixel NeoMatrix 8x8 - 64 RGB LED
This is the NeoPixel NeoMatrix a large board with 64 WS2812 RGB LEDs arranged in an 8x8 matrix. Each LED is capable of drawing as much as 60mA (at peak brightness the matrix can draw just over 3.5 Amps at 5 Volts), this adds up so it is suggested to use a 5V 2A power supply. For most uses, you’ll se..
KES 1,200.00