Free shipping on all orders above Ksh2000 to Nairobi CBD via Chania Travellers Sacco.

Mini Cellular GSM Breakout SIM800H uFL Version

Mini Cellular GSM Breakout SIM800H uFL Version

Ring, Ring! Who's that callin'? It's your breadboard! Introducing Adafruit FONA MiniGSM, an adorable all-in-one cellular phone module that lets you add voice, text, SMS and data to your project in an adorable little package.

This module measures only 1.75"x1.25" but packs a surprising amount of technology into its little frame. At the heart is a GSM cellular module (we use the latest SIM800) the size of a postage stamp. This module can do just about everything. This version has a uFL connector. For the SMA version, click here!

Quad-band 850/900/1800/1900MHz - connect onto any global GSM network with any 2G SIM (Safaricom, Airtel, Orange)
Make and receive voice calls using a headset OR an external 8Ω speaker + electret microphone
Send and receive SMS messages
Send and receive GPRS data (TCP/IP, HTTP, etc.)
Scan and receive FM radio broadcasts (yeah, we don't exactly know why this was included but it works really well)
PWM/Buzzer vibrational motor control
AT command interface with "auto baud" detection


Sounds delicious, right? 

Onboard LiPoly battery charging circuitry so you can take your project on the go. Use any 500mAh+ LiPoly or LiIon battery and recharge over the MicroUSB when necessary. Two LEDs let you know when its charging and done
Standard 4-pole TRRS headphone jack. Use any 'Android' or 'iPhone'-compatible headset with mic
Breakouts for external 8Ω speaker and electret mic if you don't want to use a headphone
Level shifting circuitry so you can run it with 2.8V to 5V logic.
Vibrational motor (buzzer) driver so you can have noiseless notifications
uFL connections for external antenna
Indicator LEDs for power and network connectivity
Standard SIM slides into the back
On its own, this module can't do anything. It requires a microcontroller to drive it! We suggest and use an Arduino but any 3-5V microcontroller with a UART can send and receive commands over the RX/TX pins.

You will also need some required accessories to make FONA work. These are not included!

SIM Card! A 2G Mini SIM card is required to do anything on the cellular network. 
Lipoly Battery - 500mAh or larger

MicroUSB cable for charging the battery.
External Antenna - We like this slim sticker-type, which plugs right in. Alternatively,  this right-angle SMA one will work but you'll also need a uFL to SMA adapter cable so you can connect to your SMA antenna

There's also some recommended accessories. They are not required but chances are you'll want them!

TRRS 4-Pole Headset - Any 'iPhone' or 'Android' compatible (but not iPhone original) should work.
External Mic & Speaker - If you want to talk directly to your FONA, an electret mic and mini 8 ohm speaker will do quite nicely.
Vibrating motor - the FONA can drive this directly, just solder a mini vibrating motor disc in!
USB console cable - the microUSB connector is for charging only, but you can wire up a console cable for direct-connection to the module if you want to send commands from a terminal (great for testing and tweaking)

Datasheets:


Tutorial

Write a review

Please login or register to review
  • Views: 3714
  • Product Code: SIM800 ufl Module
  • Availability: In Stock
  • KES 4,200.00

Tags: GSM module, GSM/GPRS

Feather is the new development board from Adafruit, and like its namesake it is thin, light, and let..
KES 5,500.00
Output: 1200mAh at 3.7V nominalThin, light and powerfulComes pre-attached 2-pin JST-PH connectorThe ..
KES 400.00
Very low-cost cellphone module. A mini GSM / GPRS breakout board based on SIM800L module, supports q..
KES 1,000.00 KES 850.00
5v 4-channel relay interface board. It can be controlled directly by a wide range of microcontroller..
KES 400.00
Can be used to detect soil moisture when making an automatic plant watering system.  Consists ..
KES 150.00
Control the flow of fluid using the flow of electrons! This liquid valve would make a great addition..
KES 900.00
The Arduino Mega 2560 is a microcontroller board based on the ATmega 2560 . It has 54 digi..
KES 1,600.00
They are used in gas leakage detecting  equipments in family and industry, are suitable for det..
KES 400.00
Atmel's ATMega328P 8-Bit Processor is in a 28 pin DIP package. It's like the ATmega168, with do..
KES 350.00 KES 300.00
Control the flow of fluid using the flow of electrons! This liquid valve would make a great addition..
KES 3,000.00 KES 2,200.00
The DHT-22 is a low cost humidity and temperature sensor with a single wire digital interface. The s..
KES 900.00 KES 650.00
Need some indicators? We are big fans of these diffused red LEDs, in fact we use them exclusively in..
KES 100.00 KES 40.00
This is a pre-wired and waterproofed version of the DS18B20 sensor. Handy for when you need to measu..
KES 400.00 KES 300.00
OverviewSensitive to flame spectrumFeatures wide range voltage comparator LM393Adjustable sensitivit..
KES 200.00 KES 150.00