Arduino MKR WAN 1310

Arduino MKR WAN 1310
Connect your sensors and actuators over long distances harnessing the power of the LoRa® wireless protocol or throughout LoRaWAN™ networks.


The Arduino MKR WAN 1310 board provides a practical and cost effective solution to add LoRa® connectivity to projects  requiring low power. This open source board can be connected to: Arduino Create, to your own LoRa® network using the Arduino Pro Gateway for LoRa®, to existing LoRaWAN™ infrastructure like The Things Network, or even to other boards using the direct connectivity mode.


The MKR WAN 1310, brings in a series of improvements when compared to its predecessor, the MKR WAN 1300. While still based on the Atmel SAMD21 low power processor, the Murata  CMWX1ZZABZ LoRa® module, and the MKR family’s characteristic crypto chip (the ECC508), the MKR WAN 1310 includes a new battery charger, a 2MByte SPI Flash, and improved control of the board’s power consumption.


The latest low power architecture has considerably improved the battery life on the MKR WAN 1310. When properly configured, the power consumption is now as low as 104uA! It is also possible to use the USB port to supply power (5V) to the board; run the board with or without batteries - the choice is yours.


Data logging and other OTA (Over The Air) functions are now possible since the inclusion of the on board 2MByte Flash. This new exciting feature will let you transfer configuration files from the infrastructure onto the board, create your own scripting commands, or simply store data locally to send it whenever the connectivity is best. Whilst the MKR WAN 1310’s crypto chip adds further security by storing credentials & certificates in the embedded secure element.


These features make it the perfect IoT node and building block for low power wide area IoT devices.  You can find here your board warranty information.


Technical Specs

Microcontroller SAMD21 Cortex-M0+ 32bit low power ARM MCU (datasheet)
Radio module CMWX1ZZABZ (datasheet)
Board Power Supply (USB/VIN) 5V
Secure Element ATECC508 (datasheet)
Supported Batteries(*) rechargeable Li-Ion, or Li-Po
Circuit Operating Voltage 3.3V
Digital I/O Pins 8
PWM Pins 12 (0, 1, 2, 3, 4, 5, 6, 7, 8, 10, A3 - or 18 -, A4 -or 19)
UART 1
SPI 1
I2C 1
Analog Input Pins 7 (ADC 8/10/12 bit)
Analog Output Pins 1 (DAC 10 bit)
External Interrupts 8 (0, 1, 4, 5, 6, 7, 8, A1 -or 16-, A2 - or 17)
DC Current per I/O Pin 7 mA
CPU Flash Memory 256 KB (internal)
QSPI Flash Memory 2MByte (external
SRAM 32 KB
EEPROM no
Clock Speed 32.768 kHz (RTC), 48 MHz
LED_BUILTIN 6
USB Full-Speed USB Device and embedded Host
Antenna gain 2dB (bundled antenna at the Arduino Store)
Carrier frequency 433/868/915 MHz
Working region EU/US (confirmed) for other countries, please confirm the viability of using the radio spectrum.
Length 67.64 mm
Width 25 mm
Weight 32 gr.

Write a review

Please login or register to review
  • Views: 1242
  • Product Code: Arduino MKR WAN 1310
  • Availability: In Stock
  • KES 5,800.00

Tags: LoRa, Arduino MKR WAN 1310,

This is a 4" connector cable that interfaces U.FL RF connectors to regular SMA connections. ..
KES 200.00
The LoRa Radio Node v1.0 868MHz based on the ATmega328P and RFM95 868Mhz radio module. The main chip..
KES 2,800.00
This shield is used to hold HopeRF Lora module Software with WeMos ESP8266 boards it has just few mi..
KES 4,000.00
The Arduino® MKR FOX 1200 has been designed to offer a practical and cost effective solution for mak..
KES 6,000.00
Atmel's ATMega328P 8-Bit Processor is in a 28 pin DIP package. It's like the ATmega168, with do..
KES 350.00 KES 300.00
Control the flow of fluid using the flow of electrons! This liquid valve would make a great addition..
KES 3,000.00 KES 2,200.00
The DHT-22 is a low cost humidity and temperature sensor with a single wire digital interface. The s..
KES 900.00 KES 650.00
Need some indicators? We are big fans of these diffused red LEDs, in fact we use them exclusively in..
KES 100.00 KES 40.00
This is a pre-wired and waterproofed version of the DS18B20 sensor. Handy for when you need to measu..
KES 400.00 KES 300.00
OverviewSensitive to flame spectrumFeatures wide range voltage comparator LM393Adjustable sensitivit..
KES 200.00 KES 150.00

The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.

Name
Email
Phone
Comments