Menu
Your Cart

ETAPE LIQUID LEVEL SENSOR - 80CM

ETAPE LIQUID LEVEL SENSOR - 80CM
ETAPE LIQUID LEVEL SENSOR - 80CM


Write a review

Please login or register to review
KES 5,000.00
  • Stock: In Stock
  • Model: ETAPE 32"
  • SKU: 1513

The eTape Liquid Level Sensor is a solid-state sensor with a resistive output that varies with the level of the fluid. It does away with clunky mechanical floats, and easily interfaces with electronic control systems. The eTape sensor's envelope is compressed by the hydrostatic pressure of the fluid in which it is immersed. This results in a change in resistance that corresponds to the distance from the top of the sensor to the surface of the fluid. The sensor's resistive output is inversely proportional to the height of the liquid: the lower the liquid level, the higher the output resistance; the higher the liquid level, the lower the output resistance.

This is a very unique sensor, we haven't seen anything else that is affordable and accurate for measuring liquid level. This sensor seems like it would be a handy addition to an hydroponics, aquarium, fountain or pool controller, or perhaps measuring a rain tube. 

Since the sensor is resistive, it is easy to read it using a microcontroller/Arduino ADC pin

 

Technical Details

    Sensor Length: 32" (800 mm)
    Width: 1.0" (25.4mm)
    Thickness: 0.015" (0.208 mm)
    Resistance Gradient: 150Ω / inch (59Ω / cm), ± 10%
    Substrate: Polyethylene Terephthalate (PET)
    Sensor Output: 2250Ω empty, 400Ω full, ± 10%
    Actuation Depth: Nominal 1 inch (25.4 mm)
    Resolution: 0.01 inch (0.25 mm)
    Temperature Range: 15°F - 140°F (-9°C - 60°C)

For more information, check out: eTape Liquid Level Sensor Datasheet

If you have an application that requires a custom length, configuration, or output characteristics to fit a particular application, please contact us.

 

The product is currently Out-of-Stock. Please enter your details below and we will notify you as soon as the product is available.
Name
Email
Phone
Comments