SIM808 - Mini Cellular GSM + GPS Breakout

Cellular + GPS tracking, all in one? FONA 808 MiniGSM + GPS, an all-in-one cellular phone module with that lets you add location-tracking, voice, text, SMS and data to your project in an adorable little package. (It does not contain a drum machine, tho)

This module measures only 1.75"x1.6" but packs a surprising amount of technology into it's little frame. At the heart is a powerfull GSM cellular module (we use the latest SIM808) with integrated GPS. This module can do just about everything.

    Quad-band 850/900/1800/1900MHz - connect onto any global GSM network with any 2G SIM (in the USA, T-Mobile is suggested)
    Fully-integrated GPS (MT3337 chipset with -165 dBm tracking sensitivity) that can be controlled and query over the same serial port
    Make and receive voice calls using a headset or an external 32Ω speaker + electret microphone
    Send and receive SMS messages
    Send and receive GPRS data (TCP/IP, HTTP, etc.)
    PWM/Buzzer vibrational motor control
    AT command interface with "auto baud" detection

Here's the GPS specifications:

    22 tracking / 66 acquisition channels
    GPS L1 C/A code
    Sensitivity: Tracking: -165 dBm, Cold starts : -147 dBm
    Time-To-First-Fix: Cold starts: 32s (typ.), Hot starts: 1s (typ.), Warm starts: 5s (typ.)
    Accuracy: approx 2.5 meters

    Onboard LiPoly battery charging circuitry so you can take your project on the go. Use any 500mAh+ LiPoly or LiIon battery and recharge over the MicroUSB when necessary. Two LEDs let you know when its charging and done
    Standard 4-pole TRRS headphone jack. Use any 'Android' or 'iPhone'-compatible headset with mic
    Breakouts for external 32Ω speaker and electret mic if you don't want to use a headphone
    Level shifting circuitry so you can run it with 2.8V to 5V logic.
    Vibrational motor (buzzer) driver so you can have noiseless notifications
    uFL connections for external antennas
    Indicator LEDs for power and network connectivity
    Standard SIM slides into the back

On its own, this module can't do anything. It requires a microcontroller to drive it! We suggest and use an Arduino but any 3-5V microcontroller with a UART can send and receive commands over the RX/TX pins.

You will also need some required accessories to make FONA work. These are not included!

    SIM Card! A 2G Mini SIM card is required to do anything on the cellular network.
    Lipoly Battery - 500mAh or larger!
    MicroUSB cable for charging the battery.
    External uFL GSM Antenna - this slim one works great.
    (or, if you want to us an SMA antenna - a uFL to SMA adapter cable.)
    External uFL Passive GPS Antenna - like this one!