Current Sensor Module ACS712 20A

Current Sensor Module ACS712 20A

Accurate sensor to measure AC/DC current up to 20A. The sensor can even measure high AC mains current and is still isolated from the measuring part due to integrated hall sensor. The board operates on 5V.

ACS712 current sensor operates from 5V and outputs analog voltage proportional to current measured on the sensing terminals. You can simple use a microcontroller ADC to read the values.

Sensing terminal can even measure high voltages like 230V AC mains while it still is isolated from output part.

Features

100 mV/A output sensitivity
5.0 V, single supply operation
Output voltage proportional to AC or DC currents
Factory-trimmed for accuracy
Extremely stable output offset voltage
Nearly zero magnetic hysteresis
Ratiometric output from supply voltage
Low-noise analog signal path
Device bandwidth is set via the new FILTER pin
5 µs output rise time in response to step input current
80 kHz bandwidth
Total output error 1.5% at TA = 25°C
Small footprint, low-profile SOIC8 package
1.2 mΩ internal conductor resistance
2.1 kVRMS minimum isolation voltage from pins 1-4 to pins 5-8

Write a review

Note: HTML is not translated!
    Bad           Good

Captcha

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Aliquam iaculis egestas laoreet. Etiam faucibus massa sed risus lacinia in vulputate dolor imperdiet. Curabitur pharetra, purus a commodo dignissim, sapien nulla tempus nisi, et varius nulla urna at arcu.Lorem ipsum dolor sit amet, consectetur adipiscing elit. Aliquam iaculis egestas laoreet. Etiam faucibus massa sed risus lacinia in vulputate dolor imperdiet. Curabitur pharetra, purus a commodo dignissim, sapien nulla tempus nisi, et varius nulla urna at arcuLorem ipsum dolor sit amet, consectetur adipiscing elit. Aliquam iaculis egestas laoreet. Etiam faucibus massa sed risus lacinia in vulputate dolor imperdiet. Curabitur pharetra, purus a commodo dignissim, sapien nulla tempus nisi, et varius nulla urna at arcu. 

  • Views: 256
  • Product Code: ACS712 20A
  • Availability: In Stock
  • KES 400.00
Accurate sensor to measure AC/DC current up to 30A. The sensor can even measure high AC mains curren..
KES 450.00
Accurate sensor to measure AC/DC current up to 5A. The sensor can even measure high AC mains current..
KES 450.00
This is the fully integrated Hall Effect based linear current sensor ACS756. It provides economical ..
KES 900.00
Brand New and high quality LCD display with blue backlight. It can display 2 Lines × 16 Characters. ..
KES 250.00
     Rated load: 10A 250VAC/28VDC,10A 125VAC/28VDC,10A 125VAC/28VDC  &nb..
KES 50.00
Product Contents: One - 830 tie point transparent breadboard with adhesive backing   ..
KES 200.00
This is a Nerokas exclusive! These are 20cm and 10 cm long jumper wires terminated as male to male. ..
KES 200.00
Specifications Model: MB-102 Dimension: 165mm x 55mm x 10mm Tie Points: 830 Tie Points con..
KES 150.00
A 20cm, 40pcs wire cable connector from dupont. Male to Female terminated. ..
KES 100.00
The Arduino Mega 2560 is a microcontroller board based on the ATmega 2560 . It has 54 digi..
KES 2,000.00 KES 1,600.00
1. Features 1). ATMega 32U4 running at 5V/16MHz 2). Supported under IDE v1.0.1 3). On-Board micro..
KES 1,000.00 KES 700.00
Control the flow of fluid using the flow of electrons! This liquid valve would make a great addition..
KES 2,200.00 KES 2,200.00
Control the flow of fluid using the flow of electrons! This liquid valve would make a great addition..
KES 3,000.00 KES 2,200.00
Breadboard including power supply. The power supply can directly take power from DC wall plug or USB..
KES 300.00 KES 250.00
This is a blank copper board perfect for pcb prototyping/printing. It is made from FR4 glass fibre..
KES 250.00 KES 200.00