Shipping to Kampala, Kigali, Arusha, Dar Es Salaam, Addis Ababa now possible using DHL. Contact us on WhatsApp for rates.

AM2302 (wired DHT22) temperature-humidity sensor

Out Of Stock AM2302 (wired DHT22) temperature-humidity sensor

The AM2302 is a wired version of the DHT22, in a large plastic body. It is a basic, low-cost digital temperature and humidity sensor. It uses a capacitive humidity sensor and a thermistor to measure the surrounding air, and spits out a digital signal on the data pin (no analog input pins needed). Its fairly simple to use, but requires careful timing to grab data. The only real downside of this sensor is you can only get new data from it once every 2 seconds, so when using our library, sensor readings can be up to 2 seconds old.


Simply connect the red 3-5V power, the yellow wire to your data input pin and the black wire to ground. Although it uses a single-wire to send data it is not Dallas One Wire compatible! If you want multiple sensors, each one must have its own data pin! Find here an Arduino library with example code


Compared to the DHT11, this sensor is more precise, more accurate and works in a bigger range of temperature/humidity, but its larger and more expensive


There is a 5.1K resistor inside the sensor connecting VCC and DATA so you do not need any additional pullup resistors


TECHNICAL DETAILS


Low cost

3 to 5V power and I/O

2.5mA max current use during conversion (while requesting data)

Good for 0-100% humidity readings with 2-5% accuracy

Good for -40 to 80°C temperature readings ±0.5°C accuracy

No more than 0.5 Hz sampling rate (once every 2 seconds)

Body size 27mm x 59mm x 13.5mm (1.05" x 2.32" x 0.53")

3 wires 23cm long (9")

27mm wide x 58.75mm tall x 13.30mm deep

Write a review

Please login or register to review
  • Views: 3153
  • Product Code: AM2302 (wired DHT22)
  • Availability: Out Of Stock
  • KES 900.00

Tags: AM2302 (wired DHT22) temperature-humidity sensor

The DHT-22 is a low cost humidity and temperature sensor with a single wire digital interface. The s..
KES 900.00 KES 650.00
Features: Size: 28mm x 12mm x 8mm Chip: DHT11 temperature and humidity sensor Operating voltage: ..
KES 250.00
The DHT11 Temperature and Humidity sensor module is designed to detect the surrounding environment f..
KES 450.00
The Official Raspberry Pi Power Supply - Shipped with easily interchangeable heads for the UK, US, E..
KES 2,100.00
The stunning new Raspberry Pi 3 Model B has landed. This third generation model maintains the same p..
KES 5,500.00
The ESP8266 WiFi Module is a self contained SOC with integrated TCP/IP protocol stack that can give ..
KES 300.00
Can be used to detect soil moisture when making an automatic plant watering system.  Consists ..
KES 150.00
Welcome to the electronic interaction world!  Nerokas proudly presents the  Arduino Beginn..
KES 4,000.00
Atmel's ATMega328P 8-Bit Processor is in a 28 pin DIP package. It's like the ATmega168, with do..
KES 350.00 KES 300.00
Control the flow of fluid using the flow of electrons! This liquid valve would make a great addition..
KES 3,000.00 KES 2,200.00
Need some indicators? We are big fans of these diffused red LEDs, in fact we use them exclusively in..
KES 100.00 KES 40.00
This is a pre-wired and waterproofed version of the DS18B20 sensor. Handy for when you need to measu..
KES 400.00 KES 300.00
OverviewSensitive to flame spectrumFeatures wide range voltage comparator LM393Adjustable sensitivit..
KES 200.00 KES 150.00

The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.

Name
Email
Phone
Comments