64x32 RGB LED Matrix - 5mm pitch

This version is the 5mm pitch 64x32 RGB LED Matrix. Please note you cannot use an Arduino UNO to drive this size, its way too big! Use an Arduino Mega, Raspberry Pi, BBB or other device that can handle displaying to RGB matricies and has plenty of RAM.

This matrix has 2048 bright RGB LEDs arranged in a 64x32 grid on the front. On the back there are two IDC connectors (one input, one output: in theory you can chain these together) and 12 16-bit latches that allow you to drive the display with a 1:16 scan rate.

These displays are technically 'chainable' - connect one output to the next input

These panels require 13 digital pins (6 bit data, 7 bit control) and a good 5V supply, up to 4A per panel. We suggest our 10A regulated 5V adapter and then connecting a 2.1mm jack. Please check out tutorial for more details!

Comes with:

A single 64x32 RGB panel,

An IDC cable

A plug in power cable

We also include 4 mounting screws and mini-magnets (it appears these are often mounted on a magnetic base).

Note:

The back of the matrix will either be green or black

This product may come with one or two power connections

There may be a short coupling data cable installed in the center

Dimensions: 318mm x 158mm x 15mm / 12.5” x 6.2” x 0.6”

Panel weight with IDC cables and power cables: 453g

5V regulated power input @ ~4A (with all LEDs on)

5V logic

1/16 scan rate

Indoor display, 160 degree visibility

Displays are 'chainable' - connect one output to the next input - but our Arduino example code does not support this yet