Free shipping on all orders above Ksh2000 to Nairobi CBD via Chania Travellers Sacco.

Analog Electrical Conductivity Sensor /Meter V2 (K=1)

Out Of Stock Analog Electrical Conductivity Sensor /Meter V2 (K=1)

Analog electrical conductivity meter V2 is specially used to measure the electrical conductivity of aqueous solution, and then to evaluate the water quality, which is often used in water culture, aquaculture, environmental water detection and other fields.


This product, as an upgraded version of electrical conductivity meter V1, greatly improves the user experience and data precision. It supports 3~5v wide voltage input, and is compatible with 5V and 3.3V main control board; The output signal filtered by hardware has low jitters; The excitation source adopts AC signal, which effectively reduces the polarization effect, improves the precision and prolongs the life of the probe; The software library uses two-point calibration method, and can automatically identify standard buffer solution, so simple and convenient.


With this product, main control board (such as Arduino) and the software library, you can quickly build an electrical conductivity meter, plug and play, no welding. 


Conductivity is the reciprocal of the resistance, which is related to the ability of the material to carry the current. In the liquid, the reciprocal of the resistance, the conductivity, is the measure of its ability to conduct electricity. Conductivity is an important parameter of water quality. It can reflect the extent of electrolytes present in water.


Tips:

In order to ensure the measurement accuracy, it is strongly recommended to add a temperature sensor to measure the temperature, and achieve automatic temperature compensation. DS18B20 waterproof temperature sensor can also be used. 


Arduino Connection Diagram


DFR0300-Arduino Connection Diagram





Attention:

1.The probe is a laboratory-grade probe. Do not immerse in liquid for a long time. Otherwise this will shorten the life of the probe.

2.Platinum black layer is attached to the surface of the sheet metal in the probe.It should avoid any object touching it. It can only be washed with distilled water, otherwise the platinum black layer will be damaged, resulting in inaccurate measurement.



FEATURES

3.0~5.0V wide voltage input

Hardware filtered output signal, low jitter

AC excitation source, effectively reduce polarization

Gravity connector and BNC connector, plug and play, no welding

Software library supports two-point calibration, and automatically identifies standard buffer solution, integrates temperature compensation algorithm

Uniform size and connector, convenient for the design of mechanical structures




APPLICATIONS

Water quality monitoring.

Aquaculture.

Hydroponic & Aquaponic.




SPECIFICATION

Signal Conversion Board (Transmitter) V2

Supply Voltage: 3.0~5.0V

Output Voltage: 0~3.4V

Probe Connector: BNC

Signal Connector: PH2.0-3Pin

Measurement Accuracy: ±5% F.S.

Board size: 42mm*32mm/1.65in*1.26in

Electrical Conductivity Probe

Probe Type: Laboratory Grade

Cell Constant: 1.0

Support Detection Range: 0~20ms/cm

Recommended Detection Range: 1~15ms/cm

Temperature Range: 0~40°C

Probe Life: >0.5 year (depending on frequency of use)

Cable Length: 100cm




DOCUMENTS

Product WiKi

More Documents

Write a review

Please login or register to review
  • Views: 178
  • Product Code: Electrical Conductivity Sensor
  • Availability: Out Of Stock
  • KES 10,000.00

Tags: Electrical Conductivity Sensor

This is a pre-wired and waterproofed version of the DS18B20 sensor. Handy for when you need to measu..
KES 400.00 KES 300.00
This is the latest DS18B20 1-Wire digital temperature sensor from Maxim IC. Reports degrees C with 9..
KES 150.00
Atmel's ATMega328P 8-Bit Processor is in a 28 pin DIP package. It's like the ATmega168, with do..
KES 350.00 KES 300.00
Control the flow of fluid using the flow of electrons! This liquid valve would make a great addition..
KES 3,000.00 KES 2,200.00
The DHT-22 is a low cost humidity and temperature sensor with a single wire digital interface. The s..
KES 900.00 KES 650.00
Need some indicators? We are big fans of these diffused red LEDs, in fact we use them exclusively in..
KES 100.00 KES 40.00
OverviewSensitive to flame spectrumFeatures wide range voltage comparator LM393Adjustable sensitivit..
KES 200.00 KES 150.00