BMS Board 3S 30A Balanced Version 11.1V 12.6V
Scope: Suitable for lithium battery with nominal voltage of 3.7V and full voltage of 4.2V (including 18650, 26650, polymer battery, no size limit)
Product size: 41*50*3.4MM (standard) 41*55*3.4MM (equal)
Charging voltage: 12.6V-13.6V
Continuous discharge current (upper limit): 30A If the heat dissipation environment is not good, please reduce the load current.
Continuous charging current (upper limit): 20A
Equilibrium version: Suitable for electric drills with starting current below 60A, power below 130W, or resistive load below 378 with balanced charging function.
Note 1: Three 10C-20C power batteries or six 5C-10C power batteries are required to successfully start the drill (recommended power battery model: VTC4 VTC4A VTC5A VTC6)
Note 2: Strictly follow the wiring of the diagram 0V, 4.2V, 8.4V, 12.6V, do not touch any components on the board when soldering the wire, do not intentionally short circuit
Note 3: When soldering the battery for the first time or charging, as long as the single battery exceeds 4.2V, the 430 resistor will heat up and discharge (discharge to about 4.19V to stop heating). If the 430 resistor is severely heated (heat is not enough to touch, please check if the wrong line is connected)
- Views: 8173
- Product Code: BMS Board 3S 30A Balanced
- Availability: Out Of Stock
- KES 600.00
Tags: BMS, Battery Management System, 11.1V, 12.6V. 30A
3S 11.1V 10A Battery Management System / BMS Module
Description3Cell / 3S 11.1V 10A Battery Management System / BMS Over Voltage, Over Current, Short Ci..
KES 300.00
4S 14.8V 20A Battery Management System / BMS Module
Specifications:Model: HX-4S-D22Size: 34.7 * 35.5 * 3.6mmOvercharge voltage range: 4.25-4.35v ± 0.05v..
KES 400.00
Lithium Ion Battery 3.7V 800mAh ICR14500
Nominal Voltage : 3.7VCapacity : 800mAh Lowest Discharge Voltage : 2.50VStandard Charge : CC/CV..
KES 230.00
2S 7.4V 10A Battery Management System / BMS Module
Model: HX - 2S - JH20 overcharging range: 4.25-4.35 v plus or minus 0.05 v Size: 46.7 * 23 * 3...
KES 250.00
Lithium Ion Cylindrical Battery 3.7V - 18650 Cell (2600mAh)
This lithium ion battery contains a 2600mAh and a protection circuit that provides over-voltage, und..
KES 380.00
13S 35A 48V Li-ion Lithium 18650 Battery Pack BMS
Description:With a balancedOvercharge protectionOver discharge protectionOver current protectionShor..
KES 1,600.00
BMS Board 6S 30A (Balanced) 24V 25.2V for Lithium Ion Battery Pack
size:60*45*7mmContinuous operating current : within 30Acharge voltage :25.2V/29.4Vcharge current : 2..
KES 1,950.00
Lithium Ion Cylindrical Battery 3.7V - 18650 Cell 2600mAh Unprotected
18650 Li-Ion battery, commonly used in LED torches.NOTE: This is an unprotected rechargeable lithium..
KES 350.00
BMS 2S 20A Lithium battery protection board
Specifications:Applicable scope: Suitable for lithium batteries with nominal voltage of 3.7V and ful..
KES 500.00
BMS 3S 40A Lithium Battery Charging Board
Specifications: Charging voltage:12.6v ~ 13.6vOver Charge voltage:4.25±0.05vOver Discharge volt..
KES 550.00
DALY BMS 3S 100A Li-Ion
Model: DL3S (3.7V rated Li-ION Battery not for 3.2V Rated LiFePO4)Parameter..
KES 6,700.00
DALY LI-ION 7S BMS 60A 24V
1. OverviewDL7S24V15A/25/35A/45A/60A bms is used for 7 series 48V battery pack.We can desi..
KES 5,000.00