Free shipping on all orders above Ksh500 to Nairobi CBD via Chania Travellers Sacco.

Analog Dissolved Oxygen Sensor / Meter Kit For Arduino

Analog Dissolved Oxygen Sensor / Meter Kit For Arduino
This is a dissolved oxygen sensor kit, which is compatible with Arduino micro-controllers. This product is used to measure the dissolved oxygen in water, to reflect the water quality. It is widely applied in many water quality applications, such as aquaculture, environment monitoring, natural science and so on.
There’s an old saying regarding to keeping fish, “Good fish deserves good water”. Good water quality is very important to the aquatic organisms. Dissolved oxygen is one of the important parameters to reflect the water quality. Low dissolved oxygen in water will lead to difficulty in breathing for aquatic organisms, which may threaten their lives.
We launched a new opensource dissolved oxygen sensor kit, which is compatible with Arduino. This product is used to measure the dissolved oxygen in water, to reflect the water quality. This sensor kit helps you quickly to build your own dissolved oxygen detector.
The probe is a galvanic probe, no need of polarization time, and stay available at any time. The filling solution and membrane cap is replaceable, leading to the low maintenance cost. The signal converter board is plug and play, and has the good compatibility. It can be easily integrated to any control or detecting system.
This product is easy to use with high compatibility. With open-source code and detailed tutorial provided, this product is very suitable for your water projects in detecting the dissolved oxygen concentration for the aquatic organisms.

Arduino Dissolved Oxygen (DO) Sensor Connection Diagram
Arduino Dissolved Oxygen (DO) Sensor Connection Diagram


SPECIAL INSTRUCTION:
Due to the International Import and Export Policy, the corrosive solution (acid & alkaline solution) is not allowed to deliver by air transportation. The filling solution is not included in the kit. You have to purchase it from local shop or deploy the solution by yourself, refer to WiKi FAQ-Q4. It can’t work without filling solution!

Note:
1. The filling solution is 0.5 mol/L NaOH solution. You need to pour it in the membrane cap before use. Please be caution with the operation because the solution is corrosive. Please wear gloves! If the solution accidentally drops onto the skin, wash your skin with plenty of water immediately.
2. The oxygen permeable membrane in the membrane cap is sensitive and fragile. Be caution when handling with it. Fingernail and other sharp objects should be avoided.
3. The DO sensor will consume a little oxygen during the measurement. Please gently stir the solution and let the oxygen to be distributed evenly in the water.

FEATURES

Dissolved Oxygen Probe:
1. Galvanic probe, no need polarization time
2. Filling solution and membrane cap is replaceable, low maintenance cost

Signal Converter Board:
1. 3.3~5.5V wide-range power supply, compatible with most Arduino microcontroller
2. 0~3.0V analog output, compatible with all microcontrollers with ADC function.
3. Gravity interface, plug and play, easy to use

SPECIFICATION

Dissolved Oxygen Probe

  • Type: Galvanic Probe
  • Detection Range: 0~20mg/L
  • Response Time: Up to 98% full response, within 90 seconds (25℃)
  • Pressure Range: 0~50PSI
  • Electrode Service Life: 1 year (normal use)
  • Maintenance Period: Membrane Cap Replacement Period: 1~2 months (in muddy water); 4~5 months (in clean water) Filling Solution Replacement Period: Once every month
  • Cable Length: 2 meters
  • Probe Connector: BNC
  • Signal Converter Board
  • Operating Voltage: 3.3~5.5V
  • Output Signal: 0~3.0V
  • Cable Connector: BNC
  • Signal Connector: Gravity Analog Interface (PH2.0-3P)
  • Dimension: 42mm * 32mm
  • DOCUMENTS

    Write a review

    Please login or register to review
    • Views: 122
    • Product Code: Analog Dissolved Oxygen Sensor / Meter Kit For Arduino
    • Availability: In Stock
    • KES 20,000.00

    Tags: Analog Dissolved Oxygen Sensor / Meter Kit For Arduino

    This is a pre-wired and waterproofed version of the DS18B20 sensor. Handy for when you need to measu..
    KES 400.00 KES 300.00
    This is an Analog pH Meter Kit with industrial real-time online electrode, specially designed for Ar..
    KES 7,500.00
    Need to measure water quality and other parameters but haven't got any low cost pH meter? Find it di..
    KES 4,000.00
    The turbidity sensor detects water quality by measuring level of turbidity. It is able to detect sus..
    KES 1,600.00
    Analog electrical conductivity meter V2 is specially used to measure the electrical conductivity of ..
    KES 10,000.00
    Atmel's ATMega328P 8-Bit Processor is in a 28 pin DIP package. It's like the ATmega168, with do..
    KES 350.00 KES 300.00
    Control the flow of fluid using the flow of electrons! This liquid valve would make a great addition..
    KES 3,000.00 KES 2,200.00
    The DHT-22 is a low cost humidity and temperature sensor with a single wire digital interface. The s..
    KES 900.00 KES 650.00
    Need some indicators? We are big fans of these diffused red LEDs, in fact we use them exclusively in..
    KES 100.00 KES 40.00
    OverviewSensitive to flame spectrumFeatures wide range voltage comparator LM393Adjustable sensitivit..
    KES 200.00 KES 150.00

    The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.

    Name
    Email
    Phone
    Comments