BMS 2S 20A Lithium battery protection board

BMS 2S 20A Lithium battery protection board

Specifications:

Applicable scope: Suitable for lithium batteries with nominal voltage of 3.7V and full voltage of 4.2V (including 18650, 26650, polymer lithium batteries, without limitation on the dimensions).
Product Size: 45*15*3.4mm (Standard), 48*20*3.4mm (Balancing)
Charging voltage: 8.4V - 9.0V
Continuous discharge current (upper limit): 20A (If the cooling environment is not good, reduce the load current use)
Continuous charge current (upper limit): 10A
Balanced version: Suitable for starting currents below 25A and below 50W power drills, or resistive loads below 168W, with balanced charging function.

Notes:

Note 1: The successful start of power drill requires two 10C-20C power batteries, or four 5C-10C power batteries (ordinary 18650 can not start drill! ! !); 0V and 8.4V cable, use 2 square mm Above copper wire (cannot use nickel plate!!!)
Note 2: Connect 0V, 4.2V, 8.4V according to the diagram strictly. When connecting the battery for the first time, it needs to be charged before output.
Note 3: When the battery is charged, "430" resistance heating is a normal phenomenon, indicating that the equalizing circuit is working; if the "430" resistance is also heating in the state of not charging, please check whether the wrong line is connected.

Write a review

Please login or register to review
  • Views: 2805
  • Product Code: BMS 2S 20A Lithium battery protection board
  • Availability: In Stock
  • KES 500.00

Tags: BMS 2S 20A Lithium battery protection board

This lithium ion battery contains a 2600mAh and a protection circuit that provides over-voltage, und..
KES 380.00
Scope: Suitable for lithium battery with nominal voltage of 3.7V and full voltage of 4.2V (including..
KES 600.00
18650 Li-Ion battery, commonly used in LED torches.NOTE: This is an unprotected rechargeable lithium..
KES 350.00
Do you have an R/C vehicle battery pack that desperately needs a Deans connector? With our new M/F D..
KES 50.00
This is the Philips halogen CL 12v 10w. The base consists of a G4 with a 2 pin connector. This lamp ..
KES 50.00
DescriptionPair of DFRobot XT30 ConnectorsConnector Type: Male-FemaleCE-certified, non-flammable, lo..
KES 80.00
MIXZA 32GB Class 10 Micro SDHC UHS-I up to 80MB/sThis MIXZA 32GB MicroSD / TransFlash Card is for yo..
KES 700.00
Very thin wall tubing good protection for temperature sensitive components.Low shrink temp improves ..
KES 80.00
Model: 6LR61Size: 9vJacket: Aluminium Foil batteryCompliance: CE ROHSCapacity: 270ohm,24h/d,720minut..
KES 150.00 KES 120.00
Control the flow of fluid using the flow of electrons! This liquid valve would make a great addition..
KES 3,000.00 KES 2,200.00
Specifications Model: MB-102 Dimension: 165mm x 55mm x 10mm Tie Points: 830 Tie Points con..
KES 200.00 KES 180.00
Need some indicators? We are big fans of these diffused red LEDs, in fact we use them exclusively in..
KES 100.00 KES 40.00
This is a pre-wired and waterproofed version of the DS18B20 sensor. Handy for when you need to measu..
KES 400.00 KES 300.00
OverviewSensitive to flame spectrumFeatures wide range voltage comparator LM393Adjustable sensitivit..
KES 200.00 KES 150.00

The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.

Name
Email
Phone
Comments