Dragino LoRa Shield - 868Mhz

Dragino LoRa Shield - 868Mhz

The Dragino LoRa Shield is a long range transceiver on a Arduino shield form factor and based on Open source library.The LoRa Shield allows the user to send data and reach extremely long ranges at low data-rates.It provides ultra-long range spread spectrum communication and high interference immunity whilst minimising current consumption.

The LoRa Shield based on RFM95W targets professional wireless sensor network applications such as irrigation systems, smart metering, smart cities, smartphone detection, building automation, and so on.

Using Hope RF’s patented LoRa™ modulation technique the LoRa Shield can achieve a sensitivity of over -148dBm using a low cost crystal and bill of materials. The high sensitivity combined with the integrated +20 dBm power amplifier yields industry leading link budget making it optimal for any application requiring range or robustness. LoRa™ also provides significant advantages in both blocking and selectivity over conventional modulation techniques, solving the traditional design compromise between range, interference immunity and energy consumption.

These devices also support high performance (G)FSK modes for systems including WMBus, IEEE802.15.4g. The LoRa Shield deliver exceptional phase noise, selectivity, receiver linearity and IIP3 for significantly lower current consumption than competing devices.


FEATURES

  • • Compatible with 3.3v or 5v I/O Arduino Board.

  • • Frequency Band: 868 MHZ

  • • Low power consumption

  • • Compatible with Arduino Leonardo, Uno, Mega, DUE

  • • External Antenna via I-Pex connector


SPECIFICATION

  • • 168 dB maximum link budget.

  • • +20 dBm - 100 mW constant RF output vs.

  • • +14 dBm high efficiency PA.

  • • Programmable bit rate up to 300 kbps.

  • • High sensitivity: down to -148 dBm.

  • • Bullet-proof front end: IIP3 = -12.5 dBm.

  • • Excellent blocking immunity.

  • • Low RX current of 10.3 mA, 200 nA register retention.

  • • Fully integrated synthesizer with a resolution of 61 Hz.

  • • FSK, GFSK, MSK, GMSK, LoRa™ and OOK modulation.

  • • Built-in bit synchronizer for clock recovery.

  • • Preamble detection.

  • • 127 dB Dynamic Range RSSI.

  • • Automatic RF Sense and CAD with ultra-fast AFC.

  • • Packet engine up to 256 bytes with CRC.

  • • Built-in temperature sensor and low battery indicator.


PART LIST

  • • 1 x LoRa Shield (support 868M frequency)

  • • 1 x 868~915Mhz Antenna



    Manual

Write a review

Please login or register to review
  • Views: 286
  • Brand: Dragino
  • Product Code: LoRa Shield-868
  • Availability: In Stock
  • KES 2,800.00

Tags: Dragino, LoRa Shield, LORAWAN

The RFM95 transceivers feature the LoRa long range modem that provides ultra-long range spread spect..
KES 600.00
These are 20cm and 10 cm long jumper wires terminated as male to male. Use these to jumper from any ..
KES 150.00
The Arduino community has come up with the latest revision for the Uno board. It is a beautifully de..
KES 1,200.00
This GPS is a very capable GPS for the price and size. Compatible with UART capable devices includin..
KES 1,000.00 KES 800.00
W091022AUWORKPRO - a brand developed by GreatStar especially for home users and DIYers. In the last ..
KES 2,400.00 KES 2,000.00
Control the flow of fluid using the flow of electrons! This liquid valve would make a great addition..
KES 3,000.00 KES 2,200.00
Specifications Model: MB-102 Dimension: 165mm x 55mm x 10mm Tie Points: 830 Tie Points con..
KES 200.00 KES 180.00
The DHT-22 is a low cost humidity and temperature sensor with a single wire digital interface. The s..
KES 900.00 KES 650.00
Need some indicators? We are big fans of these diffused red LEDs, in fact we use them exclusively in..
KES 100.00 KES 40.00
This is a pre-wired and waterproofed version of the DS18B20 sensor. Handy for when you need to measu..
KES 400.00 KES 300.00

The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.

Name
Email
Phone
Comments