Touch Screen Module 2.8 Inch TFT for Arduino

Product Description

• Supports development boards such as Arduino UNO and Mega2560 for plug-in use without wiring
• 320X240 resolution, clear display, support for touch function
• Support 16-bit RGB 65K color display, display rich colors
• 8-bit parallel bus, faster than serial SPI refresh
• On-board 5V/3.3V level shifting IC, compatible with 5V/3.3V operating voltage
• Easy to expand the experiment with SD card slot
• Provides an Arduino library with a rich sample program
• Military-grade process standards, long-term stable work
• Provide underlying driver technical support

Product Parameters

How to use on Arduino

• Step 1: Download the test program

1. Download the Arduino test program from the Program Download column
2. For a description of the relevant test procedures, please refer to the test program documentation in the package

• Step 2: Connect the Arduino development board

1. Plug the module directly into the Arduino development board ( Do not plug in?)
2. After the module is plugged in, power on the Arduino board

• Step 3: Copy the dependent library

1. Make sure the Arduino IDE is installed on your computer
2. After installing the Arduino IDE, you need to copy the dependent library to the Arduino project directory as follows:

(1) Decompress the downloaded test package

(2) Copy the dependent libraries in the Install libraries directory in the package (shown below) to the libraries folder

of the Arduino project directory 

• Step 4: Compile and download the program to the development board

1. Open the sample in the Example directory of the package to test, compile and download

• Step 5: Observe the running of the program

1. After the program is downloaded, run it directly and observe the running status. If it can be displayed normally, the program runs

successfully, as shown in the following figure (take the display_graphics program as an example):

Program Download

2.8 inch Arduino UNO module package

Product Documentation

2.8 inch Arduino UNO Module User Manual

2.8 inch Arduino UNO Module Size Picture

2.8 inch QD-TFT2802 TFT LCD Schematic and PCB Package Library

2.8 inch TFT Specifications

Driver IC ILI9341 Data sheet

Reference Materials

Arduino IDE software use illustration

C51 Keil and stc-isp software use illustration

STM32 keil software use illustration

PCtoLCD2002 software use illustration

Image2Lcd software use illustration

Chinese and English display modulo settings

Common Software

PCtoLCD2002

Image2Lcd