- Stock: In Stock
- Model: 74LS153
- SKU: 3622
74LS153 is a member of the 74XXYY Ic series. 74LS153 is a fully complementary, on-chip, binary decoding data selection to the AND-OR gates. Separator strobe inputs are provided for each of the two four-time sections. The 74LS153 IC has a wide range of working voltage, a wide range of working conditions, and directly interfaces with CMOS, NMOS, and TTL. The output of the IC always comes in TTL which makes it easy to work with other TTL devices and microcontrollers. The IC 74LS153 is smaller in size and it has a much faster speed which makes it reliable in every kind of device.
What is a Multiplexer?
A multiplexer is a combinational logic circuit that switches one of several input lines to a single common output line. The select lines determine which input is connected to the output, and also to increase the amount of data that can be sent over a network within a certain time. It is also called a data selector.
74LS153 Pinout
74LS153 Pin Configuration
| Pin No | Pin Name | Description |
|---|---|---|
| 1 | Ea’ | Active Low Enable Pin a |
| 2 | S1 | Select Input Pin S1 |
| 3 | I3a | Multiplexer input pin I3a |
| 4 | I2a | Multiplexer input pin I2a |
| 5 | I1a | Multiplexer input pin I1a |
| 6 | I0a | Multiplexer input pin I0a |
| 7 | Za | Output Pin a |
| 8 | GND | Ground Pin |
| 9 | Zb | Output Pin b |
| 10 | I0b | Multiplexer input pin I0b |
| 11 | I1b | Multiplexer input pin I1b |
| 12 | I2b | Multiplexer input pin I2b |
| 13 | I3b | Multiplexer input pin I3b |
| 14 | S0 | Select Input Pin S0 |
| 15 | Eb’ | Active Low Enable Pin b |
| 16 | Vcc | Chip Supply Voltage |
74LS53 Features & Specifications
- Technology Family: LS
- Rating: Catalog
- Function: multiplexer
- Supply voltage: 5.25V
- Frequency at nominal voltage: 35 MHz
- Typical propagation delay: 21nS
- Low power consumption: 30mW
- ESD protection
- Channels (#): 2
- Bits (#): 16
- Digital input leakage (Max) (uA): 5
- Operating temperature: 0ºC to 70ºC
- ESD CDM (kV): 0.75
- ESD HBM (kV): 2
- Balanced propagation delays
- Designed specifically for high speed
- IOL (Max): 8mA
- IOH (Max): -0.4mA
- Configuration: 4:1
- Product type: Standard
Applications
- It is used to increase the efficiency of the communication system by allowing the transmission of data, such as audio & video data from different channels via cables and single lines.
