BME280 Temperature Humidity Barometric Pressure Sensor Module

BME280 Temperature Humidity Barometric Pressure Sensor Module

Description
ME-BME280 is a Breakout Board featuring a Bosch Sensortec ME280 Temperature, Humidity & Pressure Sensor.
The board has selectable I2C address jumper (solder link GS2), I2C pull-up resistors, 7 pin header 2.54mm, and two mounting holes 3.5mm.
Default setting of the board; single power rail Vdd=Vdd_IO (solder link GS1), pull-ups resistors (R2, R3) 10k, protocol selector resistor 0 ohm (R1), decoupling capacitors 0.1uF on both power supply pins Vdd & Vdd_IO.
If you connect board to both power rails VDD_IO 1.8V and VDD 3.3V be sure to remove the power rail jumper GS1!

Specifications:
Supply Voltage: 1.8 - 5V DC
Interface: I2C (up to 3.4MHz), SPI (up to 10 MHz)
Operational Range:
Temperature: -40 to +85°C
Humidity: 0-100%
Pressure: 300-1100 hPa
Resolution:
Temperature: 0.01°C
Humidity: 0.008%
Pressure: 0.18Pa
Accuracy:
Temperature: +-1°C
Humidity: +-3%
Pressure: +-1Pa
I2C address
SDO LOW : 0x76
SDO HIGH: 0x77

BME280 Features
- Package 2.5 mm x 2.5 mm x 0.93 mm metal lid LGA
- Digital interface I2C (up to 3.4 MHz) and SPI (3 and 4 wire, up to 10 MHz)
- Supply voltage VDD main supply voltage range: 1.71 V to 3.6 V
VDDIO interface voltage range: 1.2 V to 3.6 V
- Current consumption 1.8 uA @ 1 Hz humidity and temperature
2.8 uA @ 1 Hz pressure and temperature
3.6 uA @ 1 Hz humidity, pressure and temperature
0.1 uA in sleep mode
- Operating range -40C+85 C, 0C 100 % rel. humidity, 300C 1100 hPa- Humidity sensor and pressure sensor can be independently enabled/disabled

Bosch has stepped up their game with their new BMP280 sensor, an environmental sensor with temperature, barometric pressure that is the next generation upgrade to the BMP085/BMP180/BMP183. This sensor is great for all sorts of weather sensing and can even be used in both I2C and SPI!

This precision sensor from Bosch is the best low-cost, precision sensing solution for measuring barometric pressure with ±1 hPa absolute accuracy, and temperature with ±1.0°C accuracy. Because pressure changes with altitude, and the pressure measurements are so good, you can also use it as an altimeter with ±1 meter accuracy

The BME280 is the next-generation of sensors from Bosch, and is the upgrade to the BMP085/BMP180/BMP183 - with a low altitude noise of 0.25m and the same fast conversion time. It has the same specifications, but can use either I2C or SPI. For simple easy wiring, go with I2C. If you want to connect a bunch of sensors without worrying about I2C address collisions, go with SPI.

Package Included:
1 x GY-BME280-5 BME280 5V Atmospheric Pressure Humidity Temperature Sensor Module for Arduino SPI IIC

Write a review

Please login or register to review
  • Views: 1222
  • Product Code: BME280 5V
  • Availability: In Stock
  • KES 1,600.00

Tags: BME280, Temperature, Humidity, Barometric, Pressure Sensor

Measuring the absolute pressure of the enviroment using a digital barometer such as this has some in..
KES 150.00
The BME280 Atmospheric Sensor Breakout is the easy way to measure barometric pressure, humidity, and..
KES 1,100.00
BME280 3.3V:BEM280 technical parameters:Relative humidity range: 0-100%The temperature range is -40 ..
KES 1,500.00
Description : Serial port bluetooth, Drop-in replacement for wired serial connections, transparen..
KES 600.00
The ESP8266 WiFi Module is a self contained SOC with integrated TCP/IP protocol stack that can give ..
KES 300.00
Interface: IIC/I2CGND: Power GoundVCC: 2.2V-5.5VSCL: CLK clock (High level 2.2V-5.5V)SDA: MOSI data ..
KES 600.00
This is a 24 AWG stranded copper hook-up wire. It conforms to the UL1007 specification and is rated ..
KES 15.00
This is a 24 AWG stranded copper hook-up wire. It conforms to the UL1007 specification and is rated ..
KES 15.00
This is a 24 AWG stranded copper hook-up wire. It conforms to the UL1007 specification and is rated ..
KES 15.00
Model: 6LR61Size: 9vJacket: Aluminium Foil batteryCompliance: CE ROHSCapacity: 270ohm,24h/d,720minut..
KES 150.00 KES 120.00
Control the flow of fluid using the flow of electrons! This liquid valve would make a great addition..
KES 3,000.00 KES 2,200.00
Specifications Model: MB-102 Dimension: 165mm x 55mm x 10mm Tie Points: 830 Tie Points con..
KES 200.00 KES 180.00
Need some indicators? We are big fans of these diffused red LEDs, in fact we use them exclusively in..
KES 100.00 KES 40.00
This is a pre-wired and waterproofed version of the DS18B20 sensor. Handy for when you need to measu..
KES 400.00 KES 300.00
OverviewSensitive to flame spectrumFeatures wide range voltage comparator LM393Adjustable sensitivit..
KES 200.00 KES 150.00

The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.

Name
Email
Phone
Comments