Non-invasive AC current sensor (30A max)

Non-invasive AC current sensor (30A max)

 This non-invasive current sensor (also known as a “split core current transformer”) can be clamped around the supply line of an electrical load to tell you how much current is passing through it. It does this by acting as an inductor and responding to the magnetic field around a current-carrying conductor. By reading the amount of current being produced by the coil, you can calculate how much current is passing through the conductor.

This particular current sensor will measure a load up to 30 Amps which makes it great for building your own energy monitor to keep your power usage down, or even building an over-current protection device for an AC load. This sensor does not have a load resistor built in, so in most cases it will be necessary to place a resistor across the output to convert the coil’s induced current to a very small measurable voltage.

Documents:

    Datasheet
    Arduino Energy Monitor Project

Write a review

Please login or register to review
  • Views: 2774
  • Product Code: SCT-013-000 30A
  • Availability: In Stock
  • KES 1,000.00

Tags: current sensor

Input range: 10A ACOutput range: 5mA ACRatio: 2000: 1Resist: 205Ω ± 5%Non-linear range: 0-55AAccurac..
KES 200.00
These are 20cm and 10 cm long jumper wires terminated as male to male. Use these to jumper from any ..
KES 150.00
The Arduino community has come up with the latest revision for the Uno board. It is a beautifully de..
KES 1,800.00
Brand New and high quality LCD display with Yellow/Green backlight. It can display 2 Lines × 16..
KES 400.00
Specifications Product Category: Linear Voltage Regulators - Standard Polarity: Positive Number..
KES 30.00
This is a 24 AWG stranded copper hook-up wire. It conforms to the UL1007 specification and is rated ..
KES 15.00
Model: 6LR61Size: 9vJacket: Aluminium Foil batteryCompliance: CE ROHSCapacity: 270ohm,24h/d,720minut..
KES 150.00 KES 120.00
Control the flow of fluid using the flow of electrons! This liquid valve would make a great addition..
KES 3,000.00 KES 2,200.00
Specifications Model: MB-102 Dimension: 165mm x 55mm x 10mm Tie Points: 830 Tie Points con..
KES 200.00 KES 180.00
The DHT-22 is a low cost humidity and temperature sensor with a single wire digital interface. The s..
KES 900.00 KES 750.00
Need some indicators? We are big fans of these diffused red LEDs, in fact we use them exclusively in..
KES 100.00 KES 40.00
This is a pre-wired and waterproofed version of the DS18B20 sensor. Handy for when you need to measu..
KES 400.00 KES 300.00

The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.

Name
Email
Phone
Comments