Search Criteria
Products meeting the search criteria
Model: SCD30 CO2 sensor
The SCD30 from Sensirion is a high quality Nondispersive Infrared (NDIR) based CO₂ sensor capable of detecting 400 to 10000ppm with an accuracy of ±(30ppm+3%). In order to improve accuracy the SCD30 has temperature and humidity sensing built-in, as well as commands to set the current altitude. For a..
KES 8,200.00
Model: DS18B20 Chip
This is the latest DS18B20 1-Wire digital temperature sensor from Maxim IC. Reports degrees C with 9 to 12-bit precision, -55C to 125C (+/-0.5C). Each sensor has a unique 64-Bit Serial number etched into it - allows for a huge number of sensors to be used on one data bus. This is a wonderful part th..
KES 150.00
Model: XS530B1DAL2
Sensor, 10 mm Sensing, 2000 Hz Frequency Switching, 1.5 mA to 100 mA Current RatingProximity Sensor, M30 x 50, Normally Open, 10 mm, 12 to 48 VDCUL Certified, CSA Certified, CE Marked standardsMax. Output Current: 200 mATemperature Range: -25°C to +70°CShielded SensorsMetal, Threaded EnclosureDatash..
KES 3,000.00
Model: GP2Y0A21YK
Infrared proximity sensor made by Sharp. Part # GP2Y0A21YK has an analog output that varies from 3.1V at 10cm to 0.4V at 80cm. The sensor has a Japanese Solderless Terminal (JST) Connector. DocumentsDatasheet ResourcesTutorial..
KES 1,500.00
Model: TSOP38238
IR sensor tuned to 38KHz, perfect for receiving commands from a TV remote control. Runs at 3V to 5V so it's great for any microcontrollerTo use, connect pin 3 (all the way to the right) to 5V power, pin 2 (middle) to ground and listen on pin 1. It doesn't do any decoding of the signal, just pass..
KES 200.00
Brand: NXP Semiconductors
Model: MPS20N0040D-D DIP Air Pressure Sensor
A sphygmomanometer is a device that measures blood pressure. It is composes of an inflatable rubber cuff, which is wrapped around the arm. A measuring device indicates the cuff's pressure. A bulb inflates the cuff and a valve releases pressure. A stethoscope is used to listen to arterial b..
KES 400.00
Model: MQ135
The MQ135 Air Quality Sensor Module a low cost semiconductor sensor which can detect the presence of Ammonia (NH3), Mono-nitrogen oxides (NOx), Alcohol, Benzene, Smoke, Carbon-dioxide (CO 2) etc. It has good sensitivity to harmful gases in a wide range. The sensitive material used for this sensor is..
KES 600.00
Top Seller
Model: PIR Motion Sensor
This is an easy, simple to use Passive IR (PIR) sensor – it only needs a single I/O pin on a microcontroller.or can be easily interfaced with relay or output transistor to control various loads eg: lamps, motors etcWorking voltage: 4.5V to 20VOutput: High: 3.3V, Low: 0VDetection angle:&nbs..
KES 350.00
Model: QRE1113 IR LED Infrared Reflective Sensor
This version of the QRE1113 breakout board features a digital output, using a capacitor discharge circuit to measure the amount of reflection. This tiny board is perfect for line sensing when only digital I/O is available, and can be used in both 3.3V and 5V systems.The board's QRE1113 IR reflectanc..
KES 900.00
New
Model: IR QT-50
This is a 5mm Infrared break-beam sensor. These sensors are great for projects which need a simple and reliable way to detect motion or someone/something passing through an area. The pack includes both parts to create a single 'beam' with a sensor each side (you don't need to buy two of these t..
KES 1,500.00
