Search Criteria
Products meeting the search criteria
Top Seller
Model: Diffused Red 10mm Led
Check out these big 10mm through-hole LEDs! The opaque epoxy package causes these LEDs to have a soft, diffuse glow.Features:460-470nm
2.9-3.5VDC Forward Voltage
20mA Forward Current
40-60 degree viewing angle
800-1000 MCD output..
KES 10.00
New
Model: Diffused Red 5mm Through-Hole
Overview and Optical CharacteristicsThe Diffused Red 5mm LED is a classic T-1 3/4 format optoelectronic indicator engineered for clear, soft visual signaling across a wide spectrum of electronic systems. Featuring a tinted red epoxy lens, this light-emitting diode scatters light uniformly to minimiz..
KES 5.00
Model: Diffused White 10mm Led
Check out these big 10mm through-hole LEDs! The opaque epoxy package causes these LEDs to have a soft, diffuse glow.Features:460-470nm
2.9-3.5VDC Forward Voltage
20mA Forward Current
40-60 degree viewing angle
800-1000 MCD output..
KES 10.00
Model: NeoPixel NeoMatrix 8x8 - 64 RGB LED
This is the NeoPixel NeoMatrix a large board with 64 WS2812 RGB LEDs arranged in an 8x8 matrix. Each LED is capable of drawing as much as 60mA (at peak brightness the matrix can draw just over 3.5 Amps at 5 Volts), this adds up so it is suggested to use a 5V 2A power supply. For most uses, you’ll se..
KES 1,200.00
Model: OLED 128x32
This OLED it is really small, just 0.91”. It is made of 128x32 individual blue OLED pixels, each one is turned on or off by the controller chip. Because the display makes its own light, no backlight is required. This reduces the power required to run the OLED and is why the display has such high con..
KES 500.00
Model: OLED 128x64
Interface: IIC/I2CGND: Power GoundVCC: 2.2V-5.5VSCL: CLK clock (High level 2.2V-5.5V)SDA: MOSI data (High level 2.2V-5.5V)Feature:Color: Blue and Yellow LEDResolution: 128x64Power: 0.06WWide power supply range: DC 3V-5VTemperature: -30°C to 70°CDimension: 29.28 x 27.1 mm (LW)Compatible with 3.3V and..
KES 550.00
Brand: Adafruit Industries
Model: SmartMatrix SmartLED Shield (V4) for Teensy 3
So you have a Teensy and a RGB LED Matrix Panel and you want an easy way to add graphics to your matrix without having to toss aside your Teensy or do too much soldering. Enter the SmartMatrix SmartLED Shield (V4) for Teensy 3.2, 3.5, or 3.6 (not the Teensy LC)!The SmartLED Shield gives you an easy ..
KES 3,500.00
Showing 0 to 0 of 0 (0 Pages)
