This version of the QRE1113 breakout board features a digital output, using a capacitor discharge circuit to measure the amount of reflection. This tiny board is perfect for line sensing when only digital I/O is available, and can be used in both 3.3V and 5V systems.
The board's QRE1113 IR reflectance sensor is comprised of two parts - an IR emitting LED and an IR sensitive phototransistor. When you apply power to the VCC and GND pins the IR LED inside the sensor will illuminate. A 100Ω resistor is on-board and placed in series with the LED to limit current. The output of the phototransistor is tied to a 10nF capacitor. The faster that capacitor discharges, the more reflective the surface is.
These sensors are widely used in line following robots. White surfaces reflect more light than black, so, when directed towards a white surface, the capacitor will discharge faster than it would when pointed towards a black surface.
The power input and output pins are brought out to a 3-pin, 0.1" pitch header. The board also has a single mounting hole if you want to screw it onto something.
The 8x8 LED dot matrix kit has many applications in real life, such as various types of electronic display, panels for indoor or semi outdoor sign boa..
The TCRT5000L Infrared Reflective Sensors are great for detecting lines and edges. They can also be used to for close range obstacle detection. These ..
This Infrared obstacle/object detection sensor is super easy to use. It comes with on board potentiometer to adjust the sensitivity. The output is dig..
This is your basic spool of leaded solder with a 63/37 water soluble resin core. 0.8mm gauge. Mechanic Brand. Sold in units of 50gTin(Sn):63%Lead(Pb):..
The MCP3202,3204,and 3208 will work in the range from 2.7V to 5V. This ADC’s serial interface allows you to minimize microcontroller I/O pin usage whi..
A low cost, high-performance microcontroller board built around Raspberry Pi's very own chip - the RP2040.Raspberry Pi Pico is Raspberry Pi's first&nb..
The Line finder is designed for line following in robotics. It consists two parts - an IR emitting LED and an IR sensitive phototransistor. It can out..
The TCRT5000L Infrared Reflective Sensors are great for detecting lines and edges. They can also be used to for close range obstacle detection. These ..
The SparkFun Line Follower Array is a long board consisting of eight IR sensors that have been configured to read as digital bits! the line dollower h..
This Line Tracking Sensor can be used to detect black lines on white surface or vise versa for smart car applications and detection purposes.Size: 3.5..
The CNY70 is a reflective sensor that includes an infrared emitter and phototransistor in a leaded package with a daylight blocking filter.These work ..
The A3144 is an integrated Hall effect latched sensor. That’s nice but what does it do? Holding a magnet near the sensor will cause the output pin to ..
It is a component widely used in automatic control industry for detecting, controlling, and noncontact switching.When proximity switch is close to som..
The CNY70 is a reflective sensor that includes an infrared emitter and phototransistor in a leaded package with a daylight blocking filter.These work ..
This is the LIDAR-Lite v3, a compact, high-performance optical distance measurement sensor from Garmin™. When space and weight requirements are tight,..
The HC-SR04 ultrasonic sensor uses sonar to determine distance to an object like bats or dolphins do. It offers excellent range accuracy and stable re..
Sensor, 10 mm Sensing, 2000 Hz Frequency Switching, 1.5 mA to 100 mA Current RatingProximity Sensor, M30 x 50, Normally Open, 10 mm, 12 to 48 VDCUL Ce..
Infrared proximity sensor made by Sharp. Part # GP2Y0A02YK0F has an analog output that varies from 2.8V at 15cm to 0.4V at 150cm with a supply voltage..
Infrared proximity sensor made by Sharp. Part # GP2Y0A21YK has an analog output that varies from 3.1V at 10cm to 0.4V at 80cm. The sensor has a Japane..
If you've had ideas for a project that depends on the ability to sense different spectrums of visible light and react based on those measurements, the..
This is the fantastically easy to use sensor from Maxbotix. We are extremely pleased with the size, quality, and ease of use of this little range find..
his is the fantastically easy to use sensor from Maxbotix. We are extremely pleased with the size, quality, and ease of use of this little range finde..
1.This product is a PIR sensor switch , it is usually installed in the public place or the corridor of house, in the conditional weak light,when peopl..
The MPX5100DP is a dual port, differential integrated silicon pressure sensor in 6 pin SIP package. This piezoresistive transducer is a state of the a..
E3JK Series General PurposeUniversal wide range ac or dc supply voltageIP64 rated ABS housing with acrylic lensSlim space-saving construction measures..
This is an easy, simple to use Passive IR (PIR) sensor – it only needs a single I/O pin on a microcontroller.or can be easily interfaced with relay or..
This is a small device called a reed switch. When the device is exposed to a magnetic field, the two ferrous materials inside the switch pull together..
All controls can be used to detect magnetic switch: used in liquid level sensors, security alarm systems, proximity sensor, instrumentation, automotiv..
This Line Tracking Sensor can be used to detect black lines on white surface or vise versa for smart car applications and detection purposes.Size: 3.5..
The TCRT5000L Infrared Reflective Sensors are great for detecting lines and edges. They can also be used to for close range obstacle detection. These ..
Key FeaturesHigh Sensitivity: Emits near-infrared ray and catches the reflected ray which can give the response in a short time.High Precision: ToF me..
DescriptionBenewake TFMINI-S Micro LIDAR Module UART (12m)Features a single-point ranging LiDARCan achieve high frequency range detectionHas lower pow..
This SW-520D basic tilt switch can easily be used to detect orientation. Inside the can is a ball that make contact with the pins when the case is upr..
The VCNL4000 sensor is a nice way to add a small-distance proximity sensor to your microcontroller project. For longer distances (in the range of cm, ..
The Vibration module based on the vibration sensor SW-420 and Comparator LM393 to detect if there is any vibration that beyond the threshold. The thre..
DescriptionThis is a really simple vibration switch, it use very common in electronics toys, alarm, domestic appliance, electronics devices, smart hom..