Menu
Your Cart

Sparkfun

Brand: Sparkfun Model: Stepper Driver
Overview   The Big Easy Driver, designed by Brian Schmalz, is a stepper motor driver board for bi-polar stepper motors up to 2A/phase. It is based on the Allegro A4983 stepper driver chip. It's the next version of the popular Easy Driver board.   Each BigEasyDriver can drive up..
KES 2,000.00
Brand: Sparkfun Model: Bluetooth Mate Silver
The Bluetooth Mate is very similar to our BlueSMiRF modem, but it is designed specifically to be used with our Arduino Pros and LilyPad Arduinos. These modems work as a serial (RX/TX) pipe, and are a great wireless replacement for serial cables. Any serial stream from 2400 to 115200bps can be passed..
KES 5,000.00
Easy Driver
Out Of Stock
Brand: Sparkfun Model: Stepper Driver
Overview   The EasyDriver is a simple to use stepper motor driver, compatible with anything that can output a digital 0 to 5V pulse (or 0 to 3.3V pulse if you solder SJ2 closed on the EasyDriver). EasyDriver requires a 7V to 30V supply to power the motor and can power any voltage of stepp..
KES 600.00
Brand: Sparkfun Model: MCP4725 Breakout Board
You've always wanted to output analog voltages from a microcontroller, the MCP4725 is the DAC that will let you do it! The MCP4725 is an I2C controlled Digital-to-Analog converter (DAC). A DAC allows you to send analog signal, such as a sine wave, from a digital source, such as the I2C interface on ..
KES 350.00
Brand: Sparkfun Model: VNH2SP30 Dual Motor Drive
This is essentially a ramped up version of our Ardumoto motor driver shield. For this monster shield we've replaced the L298 H-bridge with a pair of VNH2SP30 full-bridge motor drivers. We've also beefed up the support circuitry so this board is capable of driving a pair of high-current motors! The V..
KES 5,000.00
Brand: Sparkfun Model: L3G4200D
This is a breakout board for the L3G4200D low-power three-axis angular rate sensor. The L3G4200D has a full scale of ±250/±500/±2000 dps and is capable of measuring rates with a user-selectable bandwidth. These work great in gaming and virtual reality input devices, GPS navigation systems and roboti..
KES 600.00
Brand: Sparkfun Model: Xbee Breakout
This is a simple breakout board for the popular XBee product from Digi. This board breaks out all 20 pins of the XBee to a 0.1" standard spacing dual row header. The spacing between 0.1" headers is 0.5" making it breadboard DIP friendly. We highly recommend using the female sockets to avoid having t..
KES 300.00
Xbee Explorer Regulated
Out Of Stock
Brand: Sparkfun Model: Xbee Explorer
The XBee Explorer Regulated takes care of the 3.3V regulation, signal conditioning, and basic activity indicators (Power, RSSI and DIN/DOUT activity LEDs). It translates the 5V serial signals to 3.3V so that you can connect a 5V (down to 3.3V) system to any XBee module. The board was conveniently de..
KES 900.00
Showing 1 to 8 of 8 (1 Pages)
The product is currently Out-of-Stock. Please enter your details below and we will notify you as soon as the product is available.
Name
Email
Phone
Comments