Categories

RFID/ RF/ WIFI Devices

RFID/ RF/ WIFI Devices
Sort By:
Show:
Display: List Grid
  • Adafruit ATWINC1500 Wifi Module
    Uses SPI to communicate You can use it in Soft AP mode to create an ad-hoc network TLS 1.2 support in firmware 19.4.4 Connect your Arduino to the Internet Connect your Arduino to the Internet with the ATWINC1500 WiFi Breakout Board w/ uFL Connector from Atmel. This 802.11bgn-capable Wi..
    KES 3,200.00
  • EDUP EP-DB1301 Wireless WiFi USB Adapter 300Mbps 2.4G/5.8G Dual Band
    Description Features 1. EEE802.11a/b/g/n, IEEE802.11e(wmm), IEEE802.11i(wpa, wpa2), IEEE802.11Htpc, IEEE802.11K, WAPI standard 2. Support 2.4GHz / 5GHz dual frequency 3. Wireless transmission rate up to 300Mbps (802.11n), according the Internet condition to adjust wireless rate automatically ..
    KES 1,700.00
  • ESP8266MOD Wifi Module
    The ESP8266 WiFi Module is a self contained SOC with integrated TCP/IP protocol stack that can give any microcontroller access to your WiFi network. The ESP8266 is capable of either hosting an application or offloading all Wi-Fi networking functions from another application processor. Each ESP8266 m..
    KES 800.00
  • HT12E HT12D Encoder Decoder for Rf Modules
    The HT 12E Encoder ICs are series of CMOS LSIs for Remote Control system applications. They are capable of Encoding 12 bit of information which consists of N address bits and 12-N data bits. Each address/data input is externally trinary programmable if bonded out. The HT 12D ICs are series of CMO..
    KES 100.00
  • LazyBone V2 - Wi-Fi Relay Switch for iOS/Android
    Description: Control any electrical device ON or OFF with your smartphone. Control lamps, routers, fans and any other electric equipment on and off via Android or iOS. This LazyBone can also be set to AP mode, so you can control it point-to-point without a router. The LazyBone V2 support insta..
    KES 5,000.00
  • LazyBone V4 - Bluetooth Relay Switch for iOS/Android
    Description: Control any electrical device ON or OFF with your smartphone. Control lamps, routers, fans and any other electric equipment on and off via Android or iOS. This LazyBone can also be set to AP mode, so you can control it point-to-point without a router. The LazyBone V2 support insta..
    KES 2,900.00
  • nRF24L01 Module
    This module based on Nordic nRF24L01, highly integrated, ultra low power (ULP) 2Mbps RF transceiver for the 2.4GHz ISM (Industrial, Scientific and Medical) band.  Nordic nRF24L01+ integrates a complete 2.4GHz RF transceiver, RF synthesizer, and baseband logic including the Enhanced ShockBurst™ ..
    KES 200.00
    Based on 1 reviews.
  • RF Link Kit 315MHZ
    The 315MHz RF link kit is consisted of transmitter and receiver, popular used for remote control.    Features   Frequency: 315Mhz Modulation: ASK Receiver Data Output: High - 1/2 Vcc, Low - 0.7v Transmitor Input Voltage: 3-12V (high voltage = more transmitting power) Transmi..
    KES 200.00
  • RF Link Kit 433MHZ
    The 433MHz RF link kit is consisted of transmitter and receiver, popular used for remote control.    Features Frequency: 433Mhz Modulation: ASK Receiver Data Output: High - 1/2 Vcc, Low - 0.7v Transmitor Input Voltage: 3-12V (high voltage = more transmitting power) Transmit..
    KES 200.00
  • RF link Kit with Encoder and Decoder 315Mhz
    Basic specs   Frequency: 315Mhz. Modulation: ASK Working Voltage: 3-12VDC(Transmitter), 5VDC(Receiver) Receiver Sensibility: -105dbm Emission Distance: 100m in open ground Defaultly 315Mhz receiver, exchangable with 433Mhz receiver.   Warning This kit is not suitable for data t..
    KES 1,500.00
  • RFID 125KHZ Sticker Tag
    Diameter: 25mm Thickness: 1mm   100% brand new and high quality Operation frequency: 125Khz Blank Compatible with all RFID readers to gain access Card read distance: 0-10 cm Water proof Color: white ..
    KES 100.00
  • RFID Card 125Khz
    This is a proximity ID card of 125KHz, EM4100. It has been specially manufactured and packaged to be clean from dust. And you can print any pictures on the PVC blank cards.  You can use it with our RDM6300 RFID reader module. ..
    KES 100.00
  • RFID Card 13.56MHz
    This is a proximity ID card of 13.56Mhz ISO14443. It has been specially manufactured and packaged to be clean from dust. And you can print any pictures on the PVC blank cards. Use it comfortably with our NFC Shield ..
    KES 100.00
  • RFID Card Reader/Detector Module Kit (13.56Mhz, RC522, S50, Mifare One)
    RC522 Chip: MF RC522 is applied to the highly integrated read and write 13.56MHz contactless communication card chip, NXP launched by the company for the "table" application of a low-voltage, low-cost, small size of the non-contact card chip to read and write, smart meters and portable handheld d..
    KES 500.00
  • RFID Key Tag 125KHZ
    This is a proximity identification token of 125Khz , EM4100. You can use it with our RDM6300 RFID reader module. ..
    KES 100.00 KES 100.00
  • RFID Module RDM6300 125Khz
    RDM6300 125KHz cardreader mini-module is designed for reading code from 125KHz card compatible read-only tags and read/write card . It can be applied in office/home security, personal identification, access control, anti-forgery, interactive toy and production control systems etc. ..
    KES 2,500.00
  • RFID Module RDM880 13.56MHZ
    Model: No. RDM880 R/W chip: MFRC500,MFRC400,MFRC531,MFRC632 Standard: ISO/IEC 14443 type a Frequency: 13.56MHz Baud Rate: 9600-115200bit/s(configurable, default9600) Power supply: DC5V(5%) Current: <70mA Operating range: 30-100mm(reading range depend on antenna and card/tag) interface: TT..
    KES 4,672.80
  • RFID Starter Kit
    This kit includes everything you need to get started with RFID. It includes a USB RFID board, ID-12LA RFID reader, and 2 RFID cards. The RFID USB Reader is a simple to use, USB to serial base unit for the ID-3LA, ID-12LA, and ID-20LA readers. Simply plug a reader into the headers and attach a min..
    KES 6,300.00
  • RFID/NFC Key Tag 13.56MHz
    Mifare-One RFID Tag (13.56MHz) is widely used in electronic locks or customer identification as well as other systems where a small and easy to carry tag is desired.   The tag can be read by almost any 13.56MHz RFID/NFC reader that can handle Mifare cards. It can be used with 13.56MHz RFID Re..
    KES 100.00
  • RFM69HCW Transceiver Radio Breakout - 868 or 915 MHz
    Sending data over long distances is like magic, and now you can be a magician with this range of powerful and easy-to-use radio modules. Sure, sometimes you want to talk to a computer (a good time to use WiFi) or perhaps communicate with a Phone (choose Bluetooth Low Energy!) but what if you want to..
    KES 1,400.00