Your Cart


Atmel AVR MKII Clone
Out Of Stock
Model: MKII
AVR ISP Programmer, compatible with AT AVRISP mkII from ATMELA professional In-System Programmer. Supports all AVR devices with ISP or PDI interface, including XMEGASupports AVR Studio 4/5/6 or higher version (delivered with firmware for AVR Studio 5, can be updated to support other AVR Studio versi..
KES 7,300.00
The ATATMEL-ICE is a complete powerful development tool for debugging and programming ARM Cortex-M based SAM and AVR microcontrollers with onchip debug capability. It supports programming and onchip debugging of all AVR 32bit microcontrollers on both JTAG and aWire interfaces, AVR XMEGA family devic..
KES 40,000.00
CP2102 USB to TTL Converter
Out Of Stock
Model: CP2102 usb ttl
We do lots of converting from TTL serial to USB (using the FTDI and Silicon Labs ICs). But what do you do if you've got a laptop and need TTL serial? This is a high quality, low cost, small, and easy to use USB to TTL converter. Device uses the Prolific IC CP2102 and supports baud rates up to 1Mbps...
KES 500.00
Model: ESP-WROOM-32 Test Programmer Socket Board
Specification:Brand newMicro USB type B Plug.Program ESP-WROOM-32 module without soldering.Provide all I/O pin for the ESP-WROOM-32 module.Build-in reset button and Bootloader button.Use the official programmer software.Fine workmanship and good performance.Easy to use.Durable in use. Package i..
KES 1,600.00
Model: FTDI Breakout Board Generic FT232RL
This is a basic breakout board for the FTDI FT232RL USB to serial IC, Revision 2. The pinout of this board matches the FTDI cable to work with official Arduino and cloned 5V Arduino boards. It can also be used for general serial applications. The major difference with this board is that it brings ou..
KES 500.00
Model: MAX3232CPE
The ‘must have’ IC for 3V projects. This is the RS232 converter IC that is capable of running at 3V and communicating with 3V logic.This chip comes in a 16-pin DIP package. Requires four external capacitors. The MAX3232 can use very small 0.1uF ceramic capacitors - no more 10uF monsters! Operates fr..
KES 250.00
Brand: Microchip Model: PICkit 4
The MPLAB® PICkit™ 4 In-Circuit Debugger/Programmer allows fast and easy debugging and programming of PIC® and dsPIC® flash microcontrollers, using the powerful graphical user interface of MPLAB X Integrated Development Environment (IDE), version 4.15.The MPLAB PICkit 4 programs faste..
KES 25,000.00
ST-LINK In-circuit Debugger and Flash Programmer for STM8 STM32 MCUs
Out Of Stock
Model: STLink Programmer
The ST-LINK is an in-circuit debugger and programmer for the STM8 and STM32 microcontroller families. The SWIM and JTAG/SWD interface is used to communicate with the STM8 or STM32 microcontroller located on your own application board.On the PC side, the USB full speed interface is used to communicat..
KES 4,500.00
Model: STLINKv2
Explore new microcontroller worlds with an ST-Link Programmer & Emulator / Debugging dongle. This little USB stick contains a microcontroller with the code for ST's classic programmer/emulator for STM8 and STM32 bit processors. Since STM's are so common, this tool will come in handy wheneve..
KES 550.00
ST-LINK/V2 In-Circuit Debugger/Programmer For STM8 And STM32
Out Of Stock
Brand: STMicroelectronics Model: ST-LINK/V2 ST-LINK V2(CN)
The ST-LINK/V2 is an in-circuit debugger and programmer for the STM8 and STM32 microcontroller families. The single wire interface module (SWIM) and JTAG/serial wire debugging (SWD) interfaces are used to communicate with any STM8 or STM32 microcontroller located on an application board.STM8 applica..
KES 2,500.00
USB to RS422/RS485 Cable USB to RS422/RS485 Cable
Out Of Stock
Model: USB to RS422/RS485 Cable
USB to RS-485/422 industrial intelligent converter; no power supply needed, plug-and-play. USB485 is a kind of USB to RS-485/422 industrial intelligent converter. It is the best solution for the communication between USB and RS-485/422. Compared with RS-232 to RS-485/422 converter, USB to RS-485/422..
KES 4,500.00
Officially supported by Arduino IDE, we can burn Arduino bootloader onto chips, and practically program any Atmel AVR microcontroller by this powerful AVR ISP programmer.     Assembled and ready to use 6-pin AVR-standard interfaces 2 LEDs to indicate "USB/Power good" and "Busy" ..
KES 1,200.00
Showing 1 to 12 of 12 (1 Pages)
The product is currently Out-of-Stock. Please enter your details below and we will notify you as soon as the product is available.