SIM800L GPRS GSM Breakout Module

SIM800L GPRS GSM Breakout Module

Very low-cost cellphone module. A mini GSM / GPRS breakout board based on SIM800L module, supports quad-band GSM/GPRS network, available for GPRS and SMS message data remote transmission.

The board features compact size and low current consumption. With power saving technique, the current consumption is as low as 1mA in sleep mode.

It communicates with microcontroller via UART port, supports command including 3GPP TS 27.007, 27.005 and SIMCOM enhanced AT Commands.

In transmission the module can consume up to 2 Amps of current. You will need to power the module between 3.7V and 4.2V. You can use a high-power buck-to-buck converter module such as this to do that. 

 

Features:

- Quad-band 850/900/1800/1900MHz

- Connect onto any global GSM network with any 2G SIM

- Make and receive voice calls using a headset or an external speaker such as this and an electret microphone such as this.

- Send and receive SMS messages.

- Send and receive GPRS data (TCP/IP, HTTP, etc.).

- Find GSM (GPRS) location - this is not GPS.

- AT command interface with "auto baud" detection.

 

Arduino Library

Write a review

Note: HTML is not translated!
    Bad           Good

Captcha

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Aliquam iaculis egestas laoreet. Etiam faucibus massa sed risus lacinia in vulputate dolor imperdiet. Curabitur pharetra, purus a commodo dignissim, sapien nulla tempus nisi, et varius nulla urna at arcu.Lorem ipsum dolor sit amet, consectetur adipiscing elit. Aliquam iaculis egestas laoreet. Etiam faucibus massa sed risus lacinia in vulputate dolor imperdiet. Curabitur pharetra, purus a commodo dignissim, sapien nulla tempus nisi, et varius nulla urna at arcuLorem ipsum dolor sit amet, consectetur adipiscing elit. Aliquam iaculis egestas laoreet. Etiam faucibus massa sed risus lacinia in vulputate dolor imperdiet. Curabitur pharetra, purus a commodo dignissim, sapien nulla tempus nisi, et varius nulla urna at arcu. 

  • Views: 2333
  • Product Code: SIM800L Breakout
  • Availability: In Stock
  • KES 1,000.00
The GPRS/GSM Shield provides you a way to use the GSM cell phone network to receive data from a remo..
KES 4,500.00
This is an LM2596S DC-DC buck converter step-down power module with high-precision potentiometer, ca..
KES 200.00
Ring, Ring! Who's that callin'? It's your breadboard! Introducing Adafruit FONA MiniGSM, an adorable..
KES 6,000.00
Ring, Ring! Who's that callin'? It's your breadboard! Introducing Adafruit FONA MiniGSM, an adorable..
KES 4,950.00
SIM808 Module features   Quad-Band GSM 850/900/1800/1900MHz GPRS multi-slot class 12/10 GP..
KES 3,000.00
SIM800L is the advanced version of SIM900 series, and the V2.0 even more advance with the ability to..
KES 1,800.00
This is a 2-pin, through-hole PH series JST connector. The pins are spaced by 2mm 2 pin JST Conne..
KES 20.00
Specifications Row to Row Distance 7.62mm Contact Termination Through Hole Number of Pins ..
KES 20.00
Single row of 40-holes, female header. Step: 2.54mm. Can be cut to size with a pair of wire-cutters..
KES 20.00
1x40 Pin 1.27mm Single Row Straight Header Strip. Features: Gold Plated Square Pin Side Notch..
KES 20.00
Polymer Li-ion rechargeable battery   Model: 852540   Dimensions T*W * L: 8.5mm*25mm *..
KES 550.00
Product Name : 1.5 V Battery Case;Material : Plastic, Electric Part Dimension : 5.5 x 3 x 1.5cm/ 2...
KES 50.00
The Arduino Mega 2560 is a microcontroller board based on the ATmega 2560 . It has 54 digi..
KES 2,000.00 KES 1,600.00
1. Features 1). ATMega 32U4 running at 5V/16MHz 2). Supported under IDE v1.0.1 3). On-Board micro..
KES 1,000.00 KES 700.00
Control the flow of fluid using the flow of electrons! This liquid valve would make a great addition..
KES 2,200.00 KES 2,200.00
Control the flow of fluid using the flow of electrons! This liquid valve would make a great addition..
KES 3,000.00 KES 2,200.00
Breadboard including power supply. The power supply can directly take power from DC wall plug or USB..
KES 300.00 KES 250.00
This is a blank copper board perfect for pcb prototyping/printing. It is made from FR4 glass fibre..
KES 250.00 KES 200.00