MP1584 Buck / Step Down 3A Adjustable Regulator Module

MP1584 Buck / Step Down 3A Adjustable Regulator Module

This DC/DC step-down voltage converter is based on MP1584, it converts input voltage between 4.5V and 28V into a smaller voltage between 0.8V and 18V, capable of driving a 3A load with excellent line and load regulation.


Note: Input must be >1.5V higher than output! The chip will jumper to high temperature protection mode when it work at a high-power conversion, without any cooling, it is able to output 3A current at 5V. But at higher output voltage, the current output capacity is lower than 3A, the minimum is 2A.




Feature

Wide 4.5V to 28V Operating Input Range

Up to 92% Efficiency

Programmable Switching Frequency from 100kHz to 1.5MHz

High-Efficiency Pulse Skipping Mode for Ceramic Capacitor Stable

Internally Set Current Limit without a Current Sensing Resistor

Cycle-by-Cycle Over Current Protection

Input Under Voltage Lockout

Specification

Input Voltage: 4.5V-28VDC

Output Voltage: 0.8V-18VDC

Continuous Output Current: Max. 3A

Peek Output Current: 4A

Max. Efficiency: 92%

Output Ripple: <30mV

Switching Frequency: 100kHz to 1.5MHz

Operating Temperature: -40℃ to +85℃

Dimensions: 22mm*17mm*4mm(l*w*h)

Write a review

Please login or register to review
  • Views: 3559
  • Product Code: MP1584
  • Availability: In Stock
  • KES 150.00

Tags: MP1584 Buck / Step Down 3A Adjustable Regulator Module

This is an LM2596S DC-DC buck converter step-down power module with high-precision potentiometer, ca..
KES 200.00
DC-DC CC CV Buck Converter Volt Step Down 12V 19V 24V Car Laptop Power Supply Module 7-40V to 1.2-35..
KES 1,100.00
Input voltage range: 6V-32VOutput voltage: default 5V, automatically adjust between 3-12V after trig..
KES 500.00
Product Name: Decoy fast charge trigger detectorPower: 100WVoltage: 3-20VCurrent: 0-5AOptional Type:..
KES 1,300.00
Here's a handy Arduino shield from Adafruit: we've had a lot of people looking for a dedicated and w..
KES 1,500.00
The BME280 Atmospheric Sensor Breakout is the easy way to measure barometric pressure, humidity, and..
KES 1,100.00
Main Features: The 4-slot battery holder case box can hold 4 pieces 18650 batteries Keep your batt..
KES 400.00
18650 cylindrical battery holder, fire retardant pc+pp+gp materials;Crack resistant edge with the sl..
KES 7.00
Breakout board for the 3 axis ADXL335 from Analog Devices. The ADXL335 is a triple axis acceleromete..
KES 550.00
W091022AUWORKPRO - a brand developed by GreatStar especially for home users and DIYers. In the last ..
KES 2,400.00 KES 2,000.00
Control the flow of fluid using the flow of electrons! This liquid valve would make a great addition..
KES 3,000.00 KES 2,200.00
Specifications Model: MB-102 Dimension: 165mm x 55mm x 10mm Tie Points: 830 Tie Points con..
KES 200.00 KES 180.00
The DHT-22 is a low cost humidity and temperature sensor with a single wire digital interface. The s..
KES 900.00 KES 650.00
Need some indicators? We are big fans of these diffused red LEDs, in fact we use them exclusively in..
KES 100.00 KES 40.00
This is a pre-wired and waterproofed version of the DS18B20 sensor. Handy for when you need to measu..
KES 400.00 KES 300.00

The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.

Name
Email
Phone
Comments