SmartMatrix SmartLED Shield (V4) for Teensy 3

SmartMatrix SmartLED Shield (V4) for Teensy 3

So you have a Teensy and a RGB LED Matrix Panel and you want an easy way to add graphics to your matrix without having to toss aside your Teensy or do too much soldering. Enter the SmartMatrix SmartLED Shield (V4) for Teensy 3.2, 3.5, or 3.6 (not the Teensy LC)!


The SmartLED Shield gives you an easy way to connect up a Teensy 3.2, Teensy 3.5, or Teensy 3.6 to one of our RGB LED Matrix Panels. The example sketches included with the SmartMatrix Library will get you started quickly displaying graphics, patterns, or even animated GIFs from a microSD card on your panel.


Features


Shield is fully assembled, no soldering required (besides adding pins to the Teensy)

HUB75 pinout, connects to panel directly or using panel's ribbon cable

5V level shifters for better compatibility with 5V panels

Support for driving Dotstar/APA102 LEDs in parallel with the LED panel, connects directly to 4-pin JST SM cable on Dotstar LEDs, or use the included cable

Expansion rows for main Teensy pins, making signals available for prototyping

Teensy is easily removed from the shield

Note: compared to previous versions of the SmartMatrix Shield, the microSD card slot was removed, as it is redundant when combined with the Teensy 3.5/3.6


The shield brings the 13 I/O signals needed to drive the panel out to a connector that matches the pinout on the panel, and brings the rest of the I/O signals out to convenient expansion headers.  The board includes pre-soldered 5V level shifters.


It's a great board for easily expanding your Teensy's capabilities. You'll also need to program in your Teensy with the SmartMatrix code available on the project website.



TECHNICAL DETAILS

Dimensions: 52mm x 49mm x 6mm / 2" x 1.9" x 0.23"

Length with attached cable: 138 mm

Height w/ Components: 15mm / 0.6"

Weight: 12g (only board), 22g (board w/header and cable)



Full Kit Contents

SmartLED Shield V4

Male 4-pin JST SM Cable (10cm)

2x8 Extra Long Pin Header

Write a review

Please login or register to review
  • Views: 2459
  • Brand: Adafruit Industries
  • Product Code: SmartMatrix SmartLED Shield (V4) for Teensy 3
  • Availability: In Stock
  • KES 3,500.00

Tags: SmartMatrix SmartLED Shield (V4) for Teensy 3

Are you looking to add a lot of color to your project? These large 32x16 RGB LED panels are an aweso..
KES 2,300.00
The Teensy is a breadboard-friendly development board with loads of features in a, well, teensy pack..
KES 3,000.00
The Teensy is a breadboard-friendly development board with loads of features in a, well, teensy pack..
KES 4,000.00
This version is the 3mm pitch 64x32 RGB LED Matrix. Please note you cannot use an Arduino UNO to dri..
KES 2,300.00
This version is the 5mm pitch 64x32 RGB LED Matrix. Please note you cannot use an Arduino UNO to dri..
KES 3,000.00
Atmel's ATMega328P 8-Bit Processor is in a 28 pin DIP package. It's like the ATmega168, with do..
KES 350.00 KES 300.00
Control the flow of fluid using the flow of electrons! This liquid valve would make a great addition..
KES 3,000.00 KES 2,200.00
The DHT-22 is a low cost humidity and temperature sensor with a single wire digital interface. The s..
KES 900.00 KES 650.00
Need some indicators? We are big fans of these diffused red LEDs, in fact we use them exclusively in..
KES 100.00 KES 40.00
This is a pre-wired and waterproofed version of the DS18B20 sensor. Handy for when you need to measu..
KES 400.00 KES 300.00
OverviewSensitive to flame spectrumFeatures wide range voltage comparator LM393Adjustable sensitivit..
KES 200.00 KES 150.00

The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.

Name
Email
Phone
Comments