RDM6300 125KHz cardreader mini-module is designed for reading code from 125KHz card compatible read-only tags and read/write card . It can be applied ..
These are 20cm and 10 cm long jumper wires terminated as male to male. Use these to jumper from any female header on any board. Multiple jumpers can b..
This is a 24 AWG stranded copper hook-up wire. It conforms to the UL1007 specification and is rated for up to 80°C and 300 VAC.Stranded wire is more f..
This is a 24 AWG stranded copper hook-up wire. It conforms to the UL1007 specification and is rated for up to 80°C and 300 VAC.Stranded wire is more f..
This is a basic 20 character by 4 line display. Black text on Green background or White text on Blue background. Utilizes the extremely common HD44780..
This is a very common 0.1uF capacitor. Used on all sorts of applications to decouple ICs from power supplies. 0.1" spaced leads make this a perfect ca..
Very low-cost cellphone module. A mini GSM / GPRS breakout board based on SIM800L module, supports quad-band GSM/GPRS network, available for GPRS and ..
The Relay is a digital normally open switch that controls a relay capable of switching much higher voltages and currents than your normal Arduino boar..
The WeMos lithium battery shield provides a means of powering your microcontroller project from a single cell (3.7V) lithium battery. The shield conta..
Interface: IIC/I2CGND: Power GoundVCC: 2.2V-5.5VSCL: CLK clock (High level 2.2V-5.5V)SDA: MOSI data (High level 2.2V-5.5V)Feature:Color: Blue and Yell..
The name says it all on this one. An ATmega328 in DIP package, pre-loaded with the Arduino Optiboot (Uno 16MHz) Bootloader. This will allow you to use..
This is a 24 AWG stranded copper hook-up wire. It conforms to the UL1007 specification and is rated for up to 80°C and 300 VAC.Stranded wire is more f..
DS3231 is a low-cost, extremely accurate I2C real-time clock (RTC), with an integrated temperature-compensated crystal oscillator (TCXO) and crystal. ..
This is our heat shrink kit. We use it for all sorts of handy projects. Use it to reinforce connections, protect devices, and electrically isolate exp..
Need some indicators? We are big fans of these diffused red LEDs, in fact we use them exclusively in our kits. They are fairly bright so they can be s..
Features:This is a great 400W DC to DC step-up power supply module for electric equipment, digital products, laptop, etc.Input and output are designed..
This module based on Nordic nRF24L01, highly integrated, ultra low power (ULP) 2Mbps RF transceiver for the 2.4GHz ISM (Industrial, Scientific and Med..
Ideal for development and prototyping work, Stripboard (Veroboard) is designed primarily for hard wiring of discrete components, typically in analogue..
Need some indicators? We are big fans of these diffused red LEDs, in fact we use them exclusively in our kits. They are fairly bright so they can be s..
This CAN Bus Module based on the CAN bus controller MCP2515 and CAN transceiver TJA1050. With this module, you will easy to control any CAN Bus device..
A very powerful 5mW red laser. Fun, but don't point in anyone's eyes. It emits a straight red line that Can be used for Laser positioning, Medical equ..