Lithium Ion Battery Pack - 3.7V 4400mAh

Lithium Ion Battery Pack - 3.7V 4400mAh

Need a big battery for your project? This lithium ion pack is made of 2 balanced 2200mAh cells for a total of 4400mA capacity! The cells are connected in parallel and spot-welded to a protection circuit that provides over-voltage, under-voltage and over-current protection.


Each cell can provide 1A of current for about 4 hours so all together the peak current you can draw is a little over 1.5 Amps. Note that these batteries are not designed to sustain such high loads, we suggest keeping any constant current draw under 1A.


The packs come with color coded wires, and now they come with a JST 2-pin cable attached for use with our chargers! Because they have a genuine JST connector, not a knock-off, the cable wont snag or get stuck in a matching JST jack, they click in and out smoothly. The cables are rated for 2A so if you use them keep that in mind.


The included protection circuitry keeps the battery voltage from going too high (over-charging) or low (over-use) which means that the battery will cut-out when completely dead at 2.5V. However, even with this protection it is very important that you only use a LiIon/LiPoly constant-voltage/constant-current charger to recharge them and at a rate of 0.5C (2.2A) or less.


Like most lithium-ion packs, the batteries we sell do not have thermistors built in. This is why we suggest charging at 0.25C or even less - 1A max in this case. Of course, you can charge at a lower rate - it'll just take a little longer to fill up.


Additional safety notes: Do not use a NiMH/NiCad/lead-acid charger! Also, do not abuse these batteries, do not short, bend, crush or puncture. Never charge or use unattended. Always inspect batteries and surrounding circuitry constantly for any damage, loose wiring, or possibility of short circuits. Polarity matches all Adafruit LiPoly/LiIon chargers and boards, other brands may have reverse polarity and can destroy your battery. As with all Lithium ion polymer batteries and with any power source - they should be used by experts who are comfortable working with power supplies



TECHNICAL DETAILS

2 x 2200mAh Lithium Ion 18650-sized cells in parallel

Dimensions: 69mm x 37mm x 18mm / 2.7" x 1.5" x 0.71"

Weight: 95 g/ 3.5 oz

Max recommended charging rate: 1A

Max recommended discharge rate: 2.2A




MSDS Report

Datasheet

Write a review

Please login or register to review
  • Views: 4498
  • Brand: PK Cell
  • Product Code: ICR18650 4400mah 3.7V with PCB
  • Availability: In Stock
  • KES 1,000.00

Tags: Lithium Ion Battery, battery, 18650, 3.7V, 4400mah, rechargeable

Need a massive battery for your project? This lithium ion pack is made of 3 balanced 2200mAh cells f..
KES 1,400.00
Need a big battery for your project? This lithium ion battery contains a 2200mAh and a protection ci..
KES 500.00
This lithium ion battery contains a 2600mAh and a protection circuit that provides over-voltage, und..
KES 380.00
WeMos LOLIN32 V1.0.0 WiFi Bluetooth ESP-32 Based BoardThe WeMos LOLIN32 board is based on ..
KES 1,400.00
18650 Li-Ion battery, commonly used in LED torches.NOTE: This is an unprotected rechargeable lithium..
KES 350.00 KES 270.00
This module is made for charging rechargeable lithium batteries using the constant-current/constant-..
KES 80.00
This is high quality 25cm Micro USB 2.0 to USB type A cable, a standard USB connector for cellphones..
KES 200.00
The WeMos lithium battery shield provides a means of powering your microcontroller project from a si..
KES 300.00
Manufacturer: WEALTH METAL RoHS: Yes Specification   Barrel-Type DC Power Jack P..
KES 50.00
Don't leave your next physical computing project stranded in a world of black and white! This color ..
KES 950.00
The HC-SR04 ultrasonic sensor uses sonar to determine distance to an object like bats or dolphins do..
KES 200.00
A 20cm, 40pcs wire cable connector from dupont. Provides a perfect DIP connection. ..
KES 100.00
W091022AUWORKPRO - a brand developed by GreatStar especially for home users and DIYers. In the last ..
KES 2,400.00 KES 2,000.00
Control the flow of fluid using the flow of electrons! This liquid valve would make a great addition..
KES 3,000.00 KES 2,200.00
Specifications Model: MB-102 Dimension: 165mm x 55mm x 10mm Tie Points: 830 Tie Points con..
KES 200.00 KES 180.00
The DHT-22 is a low cost humidity and temperature sensor with a single wire digital interface. The s..
KES 900.00 KES 650.00
Need some indicators? We are big fans of these diffused red LEDs, in fact we use them exclusively in..
KES 100.00 KES 40.00
This is a pre-wired and waterproofed version of the DS18B20 sensor. Handy for when you need to measu..
KES 400.00 KES 300.00

The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.

Name
Email
Phone
Comments