Search Criteria
Products meeting the search criteria
Model: AMG8833 Module
Product Parameters1. Accuracy: + - 2.5°C (4.5°F).2. Maximum frame rate: 10Hz,3. Power supply: 3~5V4. Temperature Measurement Range: 0°C to 80°C (32°F to 176°F) Product Description1. The AMG8833 infrared camera sensor is an 8x8 infrared thermal sensor array. When connected to your microcontrolle..
KES 5,000.00
Model: BME280 Module 3.3V
BME280 3.3V:BEM280 technical parameters:Relative humidity range: 0-100%The temperature range is -40 ° C- + 85 ° CHumidity measurement response time: 1SLag: relative humidity 2%Pressure range: 300-1100 hPaAbsolute pressure accuracy: Absolute value ± 1hPa (after welding)Absolute temperature accuracy: ..
KES 1,700.00
Model: BME280 5V
DescriptionME-BME280 is a Breakout Board featuring a Bosch Sensortec ME280 Temperature, Humidity & Pressure Sensor.The board has selectable I2C address jumper (solder link GS2), I2C pull-up resistors, 7 pin header 2.54mm, and two mounting holes 3.5mm.Default setting of the board; single power ra..
KES 1,000.00
Model: SCD30 CO2 sensor
The SCD30 from Sensirion is a high quality Nondispersive Infrared (NDIR) based CO₂ sensor capable of detecting 400 to 10000ppm with an accuracy of ±(30ppm+3%). In order to improve accuracy the SCD30 has temperature and humidity sensing built-in, as well as commands to set the current altitude. For a..
KES 8,200.00
Model: DHT11
Features:
Size: 28mm x 12mm x 8mm
Chip: DHT11 temperature and humidity sensor
Operating voltage: DC 5VParameter:
Humidity measuring range: 20-90% RH
Humidity accuracy: ± 5% RH
Temperature measuring range: 0-60°c
Temperature measurement accuracy: ± 2°c
Digital signal output..
KES 400.00
Model: AM2302/DHT22
The DHT-22 is a low cost humidity and temperature sensor with a single wire digital interface. The sensor is calibrated and doesn't require extra components so you can get right to measuring relative humidity and temperature.Features:3.3-6V Input
1-1.5mA measuring current
40-50 uA standby ..
KES 950.00
Model: DS18B20
This is a pre-wired and waterproofed version of the DS18B20 sensor. Handy for when you need to measure something far away, or in wet conditions. While the sensor is good up to 125°C the cable is jacketed in PVC so we suggest keeping it under 100°C. Because they are digital, you don't get any signal ..
KES 600.00
Model: DS18B20 Chip
This is the latest DS18B20 1-Wire digital temperature sensor from Maxim IC. Reports degrees C with 9 to 12-bit precision, -55C to 125C (+/-0.5C). Each sensor has a unique 64-Bit Serial number etched into it - allows for a huge number of sensors to be used on one data bus. This is a wonderful part th..
KES 150.00
New
Model: KSD9700 5A plastic N0 50 degree
Model.No.: KSD9700Material: PlasticNet Weight: 3gOptional: Normally Open (NO)Rated Voltage: 250VCurrent: 5ACable Length (Approx.): 7.3cm/ 2.9 inchHead Dimension (Approx.): 21 x 7.5 x 3.6mm / 0.8 x 0.3 x 0.14 inch (L*W*T)Temperature: 50℃..
KES 100.00
