Model: gshield v5
We are now selling the new v5 version of the gShield, formerly grblShield. Other than the price, there is very little difference between the v4 and the v5. Both can be used on the Arduino Uno to run grbl, or on the Arduino Due to run the TinyG Due port. The v5 power jumper simply allows the gShield ..
KES 10,000.00
Top Brand
Brand: ITEAD Studio
Model: Arduino Compatible
The GPRS/GSM Shield provides you a way to use the GSM cell phone network to receive data from a remote location. The shield allows you to achieve this via any of the three methods:
Short Message Service
Audio
GPRS Service
The GPRS Shie..
KES 4,800.00
Model: MicroSD Card module
Support Micro SD Card, Micro SDHC card (high-speed card)
The level conversion circuit board that can interface level is 5V or 3.3V
Communication interface is a standard SPI interface
Control Interface: A total of six pins (GND, VCC, MISO, MOSI, SCK, CS), GND to ground,
VCC is the p..
KES 300.00
Brand: Sparkfun
Model: VNH2SP30 Dual Motor Drive
This is essentially a ramped up version of our Ardumoto motor driver shield. For this monster shield we've replaced the L298 H-bridge with a pair of VNH2SP30 full-bridge motor drivers. We've also beefed up the support circuitry so this board is capable of driving a pair of high-current motors! The V..
KES 6,000.00
Brand: Adafruit Industries
Model: RGB Matrix Shield for Arduino
If you've got an Arduino-compatible board, with an ATmega328p chip this shield will make usage a snap! A little light soldering to attach the headers, connector and terminal block and you're ready to rock. Plug it onto your microcontroller board, and you'll be able to attach any RGB matrix wit..
KES 1,000.00
Model: RS485 Shield for Arduino
Arduino RS485 is an industrial standard for long distance, anti-interferrence and reliable communication. RS485 Arduino shield is especially designed for the Arduino controller board. It converts UART/Serial protocol to RS485 protocol. This RS485 board allows Arduino access to indu..
KES 1,500.00
Brand: Adafruit Industries
Model: SmartMatrix SmartLED Shield (V4) for Teensy 3
So you have a Teensy and a RGB LED Matrix Panel and you want an easy way to add graphics to your matrix without having to toss aside your Teensy or do too much soldering. Enter the SmartMatrix SmartLED Shield (V4) for Teensy 3.2, 3.5, or 3.6 (not the Teensy LC)!The SmartLED Shield gives you an easy ..
KES 3,500.00
Model: Arduino Compatible
A full-featured motor shield that will be able to power many simple to medium-complexity projects.
2 connections for 5V ‘hobby’ servos connected to the Arduino’s high-resolution dedicated timer – no jitter!
4 H-Bridges: L293D chipset provides 0.6A per bridge (1.2A peak) with thermal shutdown..
KES 400.00
Model: Ultimate GPS
New! Version 3 comes with the latest module which has external antenna support and Pulse-Per-Second output
-165 dBm sensitivity, 10 Hz updates, 66 channels
5V friendly design and only 20mA current draw
Breadboard friendly + two mounting holes
RTC battery-compatible
Built-in dataloggin..
KES 5,500.00
Model: Gameduino
Product Description
Gameduino is a game adapter for Arduino (or anything else with an SPI interface) built as a single shield that stacks up on top of the Arduino and has plugs for a VGA monitor and stereo speakers. The sound and graphics are definitely old-school, but thanks to the latest FPGA t..
KES 6,500.00
Model: W5500 Module
Supports Hardwired TCP/IP Protocols : TCP, UDP, ICMP, IPv4, ARP, IGMP, PPPoESupports 8 independent sockets simultaneouslySupports Power down modeSupports Wake on LAN over UDPSupports High Speed Serial Peripheral Interfac(SPI MODE 0, 3)Internal 32Kbytes Memory for TX/RX Buffers10BaseT/100BaseTX Ether..
KES 700.00
