Xbee Explorer Regulated
The XBee Explorer Regulated takes care of the 3.3V regulation, signal conditioning, and basic activity indicators (Power, RSSI and DIN/DOUT activity LEDs). It translates the 5V serial signals to 3.3V so that you can connect a 5V (down to 3.3V) system to any XBee module. The board was conveniently designed to mate directly with Arduino Pro boards for wireless bootloading and USB based configuration.
This unit works with all XBee modules including the Series 1 and 2, standard and Pro versions. Plug an XBee into this breakout and you will have direct access to the serial and programming pins on the XBee unit and will be able to power the XBee with 5V.
This board comes fully populated with 3.3V regulator (16V max input), XBee socket, four status LEDs, and level shifting. In the latest revision the diode level shifter is replaced with a more robust MOSFET level shifter.
Xbee 2mW Antenna - S2
This is the XBee XB24-Z7WIT-004 module from Digi. Series 2 improves on the power output and data pro..
KES 4,000.00
XBee Pro Module - ZB Series 2 - 63mW with Wire Antenna
This is the PRO Series 2 ZigBee protocol 63mW with wire antenna. Its good for point-to-point, multip..
KES 5,500.00
XBee 6.3mW Wire Antenna - Series 2C (ZigBee Mesh)
This is the XBee XBP24CZ7WIT-004-revC module from Digi. The new Series 2C improves upon the power ou..
KES 3,500.00
Xbee Zigbee Shield for Arduino
Use this XBee Communication Shield to directly connect your Bluetooth and RFID modules to your Ardui..
KES 1,200.00
