Here is a lovely little aluminium heatsink with fins for a typical voltage regulator such as a 7805 which is typically available in a TO-220 package. ..
These are 20cm and 10 cm long jumper wires terminated as male to male. Use these to jumper from any female header on any board. Multiple jumpers can b..
This module based on Nordic nRF24L01, highly integrated, ultra low power (ULP) 2Mbps RF transceiver for the 2.4GHz ISM (Industrial, Scientific and Med..
Connect this to that with an IDC cable! This cable has 6 pins (2x3) in 0.1"x0.1" spacing. Often used for programming AVRs. 6" long with two sockets cr..
This is a 24 AWG stranded copper hook-up wire. It conforms to the UL1007 specification and is rated for up to 80°C and 300 VAC.Stranded wire is more f..
This is a 24 AWG stranded copper hook-up wire. It conforms to the UL1007 specification and is rated for up to 80°C and 300 VAC.Stranded wire is more f..
This is a 24 AWG stranded copper hook-up wire. It conforms to the UL1007 specification and is rated for up to 80°C and 300 VAC.Stranded wire is more f..
This is a 24 AWG stranded copper hook-up wire. It conforms to the UL1007 specification and is rated for up to 80°C and 300 VAC.Stranded wire is more f..
This is a 24 AWG stranded copper hook-up wire. It conforms to the UL1007 specification and is rated for up to 80°C and 300 VAC.Stranded wire is more f..
This is a 24 AWG stranded copper hook-up wire. It conforms to the UL1007 specification and is rated for up to 80°C and 300 VAC.Stranded wire is more f..
This is the LM317TG voltage regulator, a three-terminal positive regulator with a 1.2V to 37V adjustable output voltage. This adjustable regulator pro..
Resistors are a good thing, in fact, they’re actually crucial in a lot of circuit designs. The only problem seems to be that resistors disappear into ..
An adjustable potentiometer can open up many interesting user interfaces. Turn the pot and the resistance changes. Connect VCC to an outer pin, GND to..
An adjustable potentiometer can open up many interesting user interfaces. Turn the pot and the resistance changes. Connect VCC to an outer pin, GND to..
This is a small device called a reed switch. When the device is exposed to a magnetic field, the two ferrous materials inside the switch pull together..
Resistors are a good thing, in fact, they’re actually crucial in a lot of circuit designs. The only problem seems to be that resistors disappear into ..
A row of headers - break to fit. 40 pins that can be cut to any size. Used with custom PCBs, general custom headers or for Arduino Prototype Shield.
..
The A3144 is an integrated Hall effect latched sensor. That’s nice but what does it do? Holding a magnet near the sensor will cause the output pin to ..
A float switch is a device used to sense the level of liquid within a tank. The switch may actuate a pump, an indicator, an alarm, or other device.
U..
Medium thickness enameled copper wire - 0.5mm in diameterEach spool consists of approximately 1m of wireAffordable and versatileEnamel insulation prev..
Material:MetalColor:GreenThese Toroid Ferrite Cores are used widely in power transformers,current transducers,instrument transformers,inductors,chokes..