All Products

The PoE Splitter TL-POE10R fully complies with IEEE 802.3af standard, and can work with all IEEE 802.3af compliant PoE switches and PoE Injector such as TP-LINK’s TL-POE150S, to expand your network to where you wish to place network devices but has no power outlet. How It WorksOn the input side..

This module is made for charging rechargeable lithium batteries using the constant-current/constant-voltage (CC/CV) charging method. In addition to safely charging a lithium battery the module also provides necessary protection required by lithium batteries. See below concerning the protection featu..

Simple shift register IC that can control high-voltage/high-current devices directly! Clock in data and latch it to control devices like relays, motors, high-current optical devices, and more! Each channel can sink 150mA continuous, 500mA max. DatasheetShift Registers Arduino tutori..

Product Contents:1 piece - TQFP SMD Breakout PCB for 32-64 pins 0.8mm pitch and 32-100 pins 0.5mm pitch ICsSpecifications:Side 1: Fits TQFP chips with 32-64 pins, with 0.8mm spacingSide 2: Fits TQFP chips with 32-100 pins, with 0.5mm spacingDimensions (excluding pins): 46mm (1.8") length x 38mm (1.5..

Using a magnetometer can be a little tricky, especially if you are unsure about the formulas to use to get the correct bearing and when other magnetic objects are interfering with your signal. You could download a arduino library for this module, which will also be compatible with other HMC5883L bre..

This is a breakout board for the L3G4200D low-power three-axis angular rate sensor. The L3G4200D has a full scale of ±250/±500/±2000 dps and is capable of measuring rates with a user-selectable bandwidth. These work great in gaming and virtual reality input devices, GPS navigation systems and roboti..

Specifications:Dual QC 3.0 USB Car Ports.   12V 36W dual QC3.0 outlet socket USB port provides 4x faster charging speed for compatible devices. Charge compatible devices up to 60% in just 35 minutes. And backward compatible with all QC versions. It only takes 35 minutes to charge from 0..

TTGO LoRa32 V2.1 868Mhz ESP32 LoRa OLED 0.96 Inch SD Card Bluetooth WIFI wireless Module ESP-32  SMA  Description:+Working voltage: 1.8~3.7v+Acceptable current：10~14mA+Transmit current: 120mA@+20dBm\90mA@+17dBm\29mA@+13dBm+Operating frequency:  868MMHz+Transmi..

Product:TTGO T-Beam ESP32 868Mhz WiFi Bluetooth Module ESP 32 GPS NEO-6M SMA LORA 32 18650 Battery holderNOTE:The shipping list does not include batteryCode:https://github.com/LilyGO/TTGO-T-BeamESP32WIFI&bluetoothLatest ESP32 Version: REV14MB Flash , 4MB PSRAM , 3D AntennaLORA+Working voltage: 1..