Search

High Power 2 ohm 10 Watt Resistor±5% ToleranceExcellent Heat and Humidity Withstand PerformanceLong LifeRoHS Compliant..

This is a 20 AWG stranded copper hook-up wire. It conforms to the UL1007 specification and is rated for up to 80°C and 300 VAC.Stranded wire is more flexible than solid wire and is good for projects where you need the wire to be able to bend. You should have a good wire stripping and cutting tool ha..

This is a 20 AWG stranded copper hook-up wire. It conforms to the UL1007 specification and is rated for up to 80°C and 300 VAC.Stranded wire is more flexible than solid wire and is good for projects where you need the wire to be able to bend. You should have a good wire stripping and cutting tool ha..

This is a 20 AWG stranded copper hook-up wire. It conforms to the UL1007 specification and is rated for up to 80°C and 300 VAC.Stranded wire is more flexible than solid wire and is good for projects where you need the wire to be able to bend. You should have a good wire stripping and cutting tool ha..

This is a 20 AWG stranded copper hook-up wire. It conforms to the UL1007 specification and is rated for up to 80°C and 300 VAC.Stranded wire is more flexible than solid wire and is good for projects where you need the wire to be able to bend. You should have a good wire stripping and cutting tool ha..

This is a 20 AWG stranded copper hook-up wire. It conforms to the UL1007 specification and is rated for up to 80°C and 300 VAC.Stranded wire is more flexible than solid wire and is good for projects where you need the wire to be able to bend. You should have a good wire stripping and cutting tool ha..

This is a 20 AWG stranded copper hook-up wire. It conforms to the UL1007 specification and is rated for up to 80°C and 300 VAC.Stranded wire is more flexible than solid wire and is good for projects where you need the wire to be able to bend. You should have a good wire stripping and cutting tool ha..

Jumper wires are simply wires that have connector pins at each end, allowing them to be used to connect two points to each other without soldering. Jumper wires are typically used with breadboards and other prototyping tools in order to make it easy to change a circuit as needed. Fairly si..

..

The CC2531EMK kit provides one CC2531 USB Dongle and documentation to support a PC interface to 802.15.4 / ZigBee applications. The dongle can be plugged directly into your PC and can be used as an IEEE 802.15.4 packet sniffer or for other purposes. With the CC2531 USB Firmware Library available on ..