Search

This is a 20 AWG stranded copper hook-up wire. It conforms to the UL1007 specification and is rated for up to 80°C and 300 VAC.Stranded wire is more flexible than solid wire and is good for projects where you need the wire to be able to bend. You should have a good wire stripping and cutting tool ha..

This is a 20 AWG stranded copper hook-up wire. It conforms to the UL1007 specification and is rated for up to 80°C and 300 VAC.Stranded wire is more flexible than solid wire and is good for projects where you need the wire to be able to bend. You should have a good wire stripping and cutting tool ha..

This is a 20 AWG stranded copper hook-up wire. It conforms to the UL1007 specification and is rated for up to 80°C and 300 VAC.Stranded wire is more flexible than solid wire and is good for projects where you need the wire to be able to bend. You should have a good wire stripping and cutting tool ha..

This is a 20 AWG stranded copper hook-up wire. It conforms to the UL1007 specification and is rated for up to 80°C and 300 VAC.Stranded wire is more flexible than solid wire and is good for projects where you need the wire to be able to bend. You should have a good wire stripping and cutting tool ha..

This is a 20 AWG stranded copper hook-up wire. It conforms to the UL1007 specification and is rated for up to 80°C and 300 VAC.Stranded wire is more flexible than solid wire and is good for projects where you need the wire to be able to bend. You should have a good wire stripping and cutting tool ha..

This is a 20 AWG stranded copper hook-up wire. It conforms to the UL1007 specification and is rated for up to 80°C and 300 VAC.Stranded wire is more flexible than solid wire and is good for projects where you need the wire to be able to bend. You should have a good wire stripping and cutting tool ha..

This 5.5mm/2.1mm barrel Jack/plug (male-female) to screw terminal will come in very handy if you want a DC power connector that runs off a battery pack or wired power supply. There is a 5.5/2.1mm DC plug on one end, and a screw terminal block on the other. The terminals are labeled with positive/neg..