Resistors are a good thing, in fact, they’re actually crucial in a lot of circuit designs. The only problem seems to be that resistors disappear into ..
3.3V/3W smps Module (Hi-Link) is PCB mounted plastic enclosed isolated switching step-down power supply module. It can supply 3.3V DC from 100V AC - 2..
Features:This is a great 400W DC to DC step-up power supply module for electric equipment, digital products, laptop, etc.Input and output are designed..
5V / 5W SMPS Module from Hi-Link is a PCB mounted plastic enclosed isolated switching step down power supply module. It can supply 5V Dc from 120V -23..
The AMS1117 series of adjustable and fixed voltage regulators are designed to provide up to 1A output current and to operate down to 1V input-to-outpu..
Input voltage range: 6V-32VOutput voltage: default 5V, automatically adjust between 3-12V after triggering fast charge.Output power: maximum 24W (5V@3..
DC-DC CC CV Buck Converter Volt Step Down 12V 19V 24V Car Laptop Power Supply Module 7-40V to 1.2-35V 8A 300W with LED IndicatorFeatures:Use a dedicat..
A voltage detector is handy for projects where you want to make sure your microcontroller doesn't run at a low voltage. For example, say you have a ES..
Say goodbye to unstable voltages with this LDO LD1117V33 linear regulator from STMicroelectronics. It has an overall accuracy of ±1 %. Its typical dro..
Adjust the voltage level of your devices with this inverting and step down LM2576HVT-5.0/NOPB DC to DC converter from Texas Instruments. This converte..
This is an LM2596S DC-DC buck converter step-down power module with high-precision potentiometer, capable of driving a load up to 3A with high efficie..
The LM2940-N and LM2940CT-5.0P+ positive voltage regulators feature the ability to source 1 A of output current with a dropout voltage of typically 0...
This DC/DC step-down voltage converter is based on MP1584, it converts input voltage between 4.5V and 28V into a smaller voltage between 0.8V and 18V,..
MP24943 is a monolithic, step-down, switch-mode converter. It supplies 3A of continuous output current over a wide input supply range with excellent l..
This module features the MT3608 2 Amp step up (boost) converter, which can take input voltages as low as 2V and step up the output to as high as 28V. ..
TL431 is a shunt regulator diode IC available in TO-92 and other packages. This is a three terminal IC. The output voltage can be adjusted from 2.5V t..
The LM1117 is a series of low dropout voltage regulators with a dropout of 1.2V at 800mA of load current. It has the same pin-out as National Semicond..
This is the LM317TG voltage regulator, a three-terminal positive regulator with a 1.2V to 37V adjustable output voltage. This adjustable regulator pro..
The LP2950 and LP2951 are micropower low dropout (LDO) linear voltage regulators that are specifically designed to maintain proper regulation with an ..