- Stock: In Stock
- Model: SW-18020P
- SKU: 3089
Description
This is a really simple vibration switch, it use very common in electronics toys, alarm, domestic appliance, electronics devices, smart home system.
Electrical Specs:
Voltage: less than12V
Current: <20mA
Conductive time: about 2ms
Closed resistance: <10 ohm\
Open resistance: >10M ohm
Temperature range: Operating: -40 to 80’C
Pull force of terminal: 500gf for 1 minute
Humidity: 95% RH, 40°C for 96 hours
Operating lifespan: above 200,000 cycles
Application:
Automotive devices
Home electrical devices
automatic power-off function for household appliances
Air conditon / Air warm blower fall prevention protect switches
Communication devices
Toys
Features:
SW-18020 series is spring type, Non-direction vibration induced trigger switches, any angle can be trigger.
The series of switches, at the rest is open circuit “OFF-state”, When the external force to touch and reach the corresponding vibration, Or move in speed to reach the adequate centrifugal force. The conductive feet will be conduct instantaneously “ON-State”. When the external force disappear, the switches will be revert the “OFF-State”.
Switch have the identification “P” at the bottom, for completely airtight;
The series of switches, different model has different sensitivity.
In the normal, the switches lifespan can be reached 200,000 cycles.
Suitable for the toys, anti-theft alarm system, electronics scales etc electronic product.
It doesn’t have a direction, normally it’s open circuit inside, and it turns to close when it is shaked instantly, and then turn to open again when motion is gone.
