What’s Orange Pi R1 Plus？
It’s an open-source single board computer. It can run Android 9、Ubuntu、Debian、 OpenWRT.It uses the Rockchip RK3328 SoC, and has 1GB DDR4 SDRAM
What can I do with Orange Pi R1 Plus?
Build…
- A computer
- A wireless server
- Music and sounds
- A speaker
- Android
- Scratch
- Pretty much anything else, because Orange Pi R1 Plus is open source
Who’s it for?
Orange Pi R1 Plus is for anyone who wants to start creating with technology – not just consuming it. It's a simple, fun, useful tool that you can use to start taking control of the world around you.
Hardware specification | ||
CPU | Rockchip RK3328 | |
GPU | Mali-450MP2 | |
Power management chip | RK805 | |
Memory(SDRAM) | 1GB DDR4（ shared with GPU） | |
Onboard Storage | • Micro-SD Card slot | |
Onboard Network | 10M/100M/1000M Ethernet （RTL8211E） | |
Video Output | TV CVBS output（Via 13pin interface board） | |
Audio output | 3.5mm audio port（Via 13pin interface board） | |
Power Source | USB Type C interface 5V2A input | |
USB | 1x USB 2.0 HOST | |
Low-level peripherals | 13pin header with IR pin、Tv-out、AUDIO(no MIC) 2xUSB2.0（not support）and 1 GPIO port | |
Debug serial port | UART-TX、UART-RX and GND | |
Button | 1x Reset Button | |
Fan interface | 1x cooling fan interface (5V) | |
LED | Power led & Status led | |
IR receiver | Support IR remote control (via 13pin interface board) | |
Supported OS | Android 9、Ubuntu、Debian、OpenWRT | |
| Appearance specification introduction | ||
Dimension | 56mm×57mm | |
Weight | 30.5g | |
