All Products

These are 20cm and 10 cm long jumper wires terminated as male to male. Use these to jumper from any female header on any board. Multiple jumpers can be connected next to one another on a 0.1" header. Comes in one pack of 65 jumpers!! (Colors assorted)We use these wires for everything! They work ..

A voltage detector is handy for projects where you want to make sure your microcontroller doesn't run at a low voltage. For example, say you have a ESP32 board running on a lipoly battery every few minutes. Eventually the battery runs down, and goes below 3.3V, so the voltage to the ESP32 core ..

Kapton tape is made from polyimide plastic.  It has a very high heat resistance and is used as an electrical insulation tape where there are high temperatures.Due to Kapton tape’s large range of temperature stability and electrical isolation ability, it is used during the manufacturing and fina..

A basic 12 button keypad for user input. The buttons are setup in a matrix format. This allows a microcontroller to 'scan' the 7 output pins to see which of the 12 buttons is being pressed.Check the examples below for correct pin-outs and such.Documents:Datasheet Arduino Instructable A..

Punch in your secret key into this numeric matrix keypad. This keypad has 12 buttons, arranged in a telephone-line 3x4 grid. It's made of a thin, flexible membrane material with an adhesive backing (just remove the paper) so you can attach it to nearly anything. The keys are connected into a matrix,..

This is a 4x5 button pad with sticker with 9 Pin output, which is ready to go and super slim.Features:Working voltage: 3.3-5V8 pins female header, 2.54mm Pitch..

16-Button Numeric Keypad Matrix Rubber-domes beneath each button provide satisfying key travel with each button press. Each key is emblazoned with a legible white character molded into its surface. Four mounting holes allow solid and easy mounting to a panel. The single-row 0.1-inch-pitch ..

This 16-button keypad provides a useful human interface component for microcontroller projects. Convenient adhesive backing provides a simple way to mount the keypad in a variety of applications. The Keypad 4x4 features a total of 16 buttons in Matrix form. This is a membrane keypad with no moving p..

KF2510 is a series of connectors compatible with Molex 5051 / KK 254 series. This series features a 5051-styled housing with 2.54mm pitch, in line with the more common KK 254 series.Technical Data:Pin Pitch: 2.54mmMaximum Current: 4A AC/DCMaximum Voltage: 250V AC/DCTemperature Range: -25°C - +85°CCo..

KF2510 is a series of connectors compatible with Molex 5051 / KK 254 series. This series features a 5051-styled housing with 2.54mm pitch, in line with the more common KK 254 series.Technical Data:Pin Pitch: 2.54mmMaximum Current: 4A AC/DCMaximum Voltage: 250V AC/DCTemperature Range: -25°C - +85°CCo..