SUPREME ROBOTICS Starter Kit - THE NEW ULTIMATE LEARENERS KIT for use with Arduino, Raspberry Pi or ESP For AGES 8+

THE NEW SUPREME STARTER KIT with ROBOT CHASSIS KIT - THE NEW ULTIMATE LEARENERS KIT: 

The SUPREME Starter Kit offers a rich IoT learning experience for beginners aged 8+. This is a comprehensive, hands-on educational packages designed for beginners to learn electronics, programming, and mechanics. With 500+ components, 150+ projects, and expert-led video lessons, this kit makes learning microcontroller programming and IoT engaging and accessible, RoHS Compliant.  This kit is also useful to educators, learners, and enthusiasts, which makes their value so high. Such users can engage with robotics most simply and conveniently as possible. The robotics starter kit allows users to learn crucial concepts like motor and sensor integration, along with the fundamentals of programming, instead of getting bogged down with elaborate technical setups due to all the parts being pre-selected.

Designed for Learning and Exploration

Through the robotics starter kit, all users of any educational institution can be introduced to STEM. In the process of trying to solve their problems in the robotic world, engaging with science, technology, engineering, and mathematics, learners find the kit very useful to improve their critical thinking, creativity, and problem-solving actively. After or before school, in clubs, and for home projects, these kits can provide learners with the infrastructure to work with and through play and trial and error. These robotics kits help them learn world engineering concepts.

FEATURES:-

1.      Comprehensive Components with Wide Range of Hardware:  The kit includes a diverse array of components like Integrated Circuits, Actuators, LEDs, Displays, Sensors, and more, enabling you to experiment and create a more than 200 projects with any microcontroller of your choice. Kits contain all necessary structural (chassis, wheels), electrical (motors, drivers), and electronic (sensors, microcontrollers) parts, eliminating the need to source components separately.

2.      Supports Multiple Languages:  The kit offers versatility with support for three programming languages - MicroPython, C/C++, and Piper Make, providing a diverse programming learning experience.

3.      Dedicated Support: Benefit from our ongoing assistance, including a   community forum and timely technical help for a seamless learning experience.

4.      For use with any Programmable Controllers: Usually based on platforms like Arduino, ESP, Raspberry Pi or Micro:bit, allowing control over robot behavior.

5.       Software Compatibility: Kits support beginner-friendly block-based coding (such as Scratch or mBlock) and, as skills advance, text-based languages like Python or C++.

6.      Variety of Sensors: Kits typically feature ultrasonic sensors (obstacle avoidance), infrared sensors (remote control), line-tracking sensors, and color sensors.

7.      Easy Assembly & Modular Design: Designed for beginners, featuring modular parts with, like terminal bocks, switches, for easy wiring often enabling multiple building configurations (like, robot car).

8.      Educational Materials: Included tutorials, lesson plans, and step-by-step instructions help users learn, understand, and build projects from scratch.

9.      Expandability: Many kits are compatible with additional sensors, modules, and 3D-printed parts, allowing for future upgrades and customization. 

                                                       What is Included in This Kit.

A.     BASIC COMPONENTS

• 1x                           Breadboard
• 1x                           60pcs Assorted Jumper Wires
• 1x                           65pc Jumper Wires for Breadboard
• 50x                         Resistors
• 10x                         Transistors
• 60x                         Capacitors
• 15x                         Diodes

B.     INTEGRATED CIRCUITS 

• 1x        74HC595 Shift Register - an 8-bit serial-in, parallel-out shift register used to expand a microcontroller's output pins, often used with Arduino to control 8 outputs (like LEDs or 7-segment displays) using only 3 digital pins. 
• 1x         74LS48 - a BCD (Binary-Coded Decimal) to 7-segment display decoder. It takes a 4-bit BCD input and converts it into signals that can drive a 7-segment display to show the corresponding decimal digit from 0 to 9.
• 1x          ULN2803 Motor driver - an 8-channel Darlington transistor array designed to drive high-current/high-voltage loads (up to 500mA, 50V) from lower voltage, low-current microcontroller logic like 5V TTL or CMOS.
• 1x       PC 817 Optocoupler - a popular, inexpensive 4-pin opt isolator/optocoupler from Sharp Corporation that provides 5kV of electrical isolation between circuits using an internal IR LED and phototransistor. It protects low-voltage components like microcontrollers (Arduino) from high-voltage noise and hazards, commonly acting as a signal isolator or switcher.
• 1x            LM358 Op Amp - a dual, high-gain frequency-compensated operational amplifier, which can operate from 3V to 32V single supply or from ±1.5V to ±16V dual supplies while consuming only 440μA quiescent current.

C.    DISPLAYS

• 25x        LED
• 5x           RGB LED 2 Common Anode & 2 Common Cathode
• 1x           1-Digit CC segment Display RED
• 1x           10 segment Display Red
• 1x           4-Digit 7-Segment Display Common Cathode
• 1X           LED Dot Matrix
• 1             OLED 0.96"
• 2x           8mm UV LED 

D.    ROBOTICS

·         1x           Robot 4 Wheel Drive Chassis  - a DIY educational platform featuring a durable chassis (often acrylic or PCB), four high-torque TT motors, and rubber tires for superior traction and stability. It includes a motor drive module and supports mounting popular controllers like Arduino or Raspberry Pi for projects like obstacle avoidance and line following.

E.     SOUNDS

• 2x           Buzzers (1x Active Buzzer 1x Passive Buzzer)
• 1x           FM Module TEA5767

F.      POWER & ACTUATORS

• 1x           DC Motor
• 1x           SG 90 Servo
• 1x           DC Water Pump
• 1x           1 Channel Relay Module 
• 1x           MT 3608  
• 1x            9V Relay
• 1x           TP4056 Li-ion Charger Module
• 1x           18650 Li-Ion Battery 

G.     CONTROLLER

• 10x         Assorted Power Switches & Buttons
• 1x           DC Jack with Terminal Screws
• 1x           Micro Switch
• 5x           Assorted Potentiometers
• 1x           TSOP 38238 Infrared Receiver - a 38kHz infrared receiver ideal for decoding signals from your standard TV or appliance remotes at home.
• 1x           Joystick Module
• 1x           4x3 Keypad
• 1x           MFRC522 NFC/RFID Reader Module (with 1 card + 1 tag) - a low-cost, 13.56MHz contactless RFID reader/writer module based on NXP's MFRC522 chip.
• 1x           Max 232 - an integrated circuit (IC) that converts RS-232 serial port signals to TTL/CMOS-compatible signals, facilitating communication between computers and microcontrollers. 
• 1x           LM 358 Operational Amplifier - a highly popular, low-power dual operational amplifier (op-amp) IC containing two independent amplifiers on a single chip. It is designed for single-supply operation (3V to 32V) but can handle split supplies, making it ideal for battery-powered, sensor, and audio applications, functioning efficiently as a comparator or amplifier. 
• 1x           8 Ohm 2w Speaker

H.     SENSORS & WIRELESS DEVICES

• 1x           12mm Photoresistor - a sensor whose resistance varies based on the intensity of light falling on its surface. The "12mm" refers to the diameter of the sensing area, which is generally larger than standard 5mm LDRs, providing higher sensitivity, faster response times, and better light absorption.
• 1x           10K NTC Thermistor - A 10k NTC (Negative Temperature Coefficient) thermistor is a temperature sensor that measures 10k ohm resistance at 25^oC, with resistance decreasing as temperature rises. Often utilizing a 3950 B-value, these sensors are ideal for precise temperature monitoring in HVAC, automotive, and industrial applications due to high sensitivity.
• 1x           Tilt Sensor Module - a compact, digital switch designed to detect orientation changes or movement using a gravity-activated mechanism, commonly an internal metal ball (SW-520D)
• 1x           LM 35 Temperature Sensor  -  a precision analog temperature sensor with a linear voltage output proportional to Celsius temperature
• 1x           Reed Switch - a hermetically sealed, normally open (NO) magnetic switches used to detect proximity. A magnetic proximity switch consists of two ferromagnetic reeds (metal plates) sealed inside a glass envelope, which close or open a circuit when a magnet is brought nearby.
• 1x           PIR Motion Sensor Module - an electronic device that detects motion by measuring changes in infrared (heat) radiation emitted by objects, typically people or animals, within its field of view.
• 1x           Rainwater Level Sensor Module - detect the depth or presence of water in tanks for irrigation, IoT, and Arduino projects. 
• 1x           Ultrasonic Module - a sensor used for detecting the distance to an object using sonar. It's ideal for any robotics projects your have which require you to avoid objects, by detecting how close they are you can steer away from them!
• 1x           MPR121 Capacitive Touch Module -  a 12-channel capacitive touch sensor breakout board, often used with microcontrollers like Arduino to detect touch through conductive materials.
• 1x           DHT11 Humiture Sensor - low-cost, digital temperature and humidity sensor with a 3-5.5V operating range, designed for simple hobbyist projects. It measures 0-50⁰C.
• 1x           Current Sensor ACS712 5A Module - a Hall-effect based sensor designed for precise, isolated AC or DC current measurement up to -5A to +5A (AC/DC).
• 1x            IR sensor Module - a versatile, low-cost device for obstacle detection, line tracking, and proximity sensing (2–30 cm range) using an IR transmitter and receiver pair. 
• 1x           HC 05 Bluetooth Module - a popular, low-cost Bluetooth SPP (Serial Port Protocol) module used for wireless communication between microcontrollers (like Arduino) and devices like smartphones or laptops.
• 1x           BMP 180 Barometric Pressure sensor - a mechanical, floating device used to detect liquid levels in tanks, wells, or ponds to automatically control pumps (filling/emptying) or trigger alarms.
• 1x           Vertical Float Switch - a mechanical, floating device used to detect liquid levels in tanks, wells, or ponds to automatically control pumps (filling/emptying) or trigger alarms.
• 1x           MQ-3 Alcohol sensor - a low-cost, semiconductor analog gas sensor module designed to detect alcohol and ethanol concentrations (0.05–10 mg/L) in the air, commonly used in breathalyzers, vehicle interlocks, and portable alcohol detectors. It requires a power supply, features high sensitivity, fast response time, and adjustable sensitivity.
• 1x            MQ-4 Methane sensor  MQ-4 gas sensor has high sensitivity to Methane, also to Propane and Butane. The sensor could be used to detect different combustible gas, especially Methane, it is with low cost and suitable for different application.

• 1x            SIM800L SIM CALLING Module  a compact, low-cost quad-band GSM/GPRS module that enables microcontrollers (like Arduino, ESP32) to send/receive SMS, make voice calls, and connect to the internet via GPRS.
• 1x            Electret Microphone a type of electrostatic capacitor microphone that uses a permanently charged material (the "electret") to create an electrical field, eliminating the need for a high-voltage power supply.
• 1x            TCS230 Colour Sensor a programmable colour light-to-frequency converter module, featuring a 64-photodiode array with red, green, blue, and clear filters. It measures color by converting light intensity into a 50% duty cycle square wave, which is easily read by microcontrollers like Arduino.
  
  ONLINE TUTORIALS -----> Begin Here
                                                 -----> Nerokas Blog